|
|
Robert Gill's System File For: HTM MX-700 (System) By: Robert Gill | A complete system file for the following components. |
|
|
Marvin Gloven's Theater For: HTM MX-700 (System) By: Marvin Gloven | I have a fairly clean setup, with the right bank of 5 buttons essentially cloning the 5 remotes being replaced, plus a single START button (lower left) for family use. The START button opens a page of macros with appropriate power on/off and inputs. The controls, macros and punchthroughs are such that all functions now work as the wife/kids expect them to respond. A special thanks to Matt H. for getting me started on some basics! |
|
|
Harvey Gordon's Home Theater For: HTM MX-700 (System) By: Harvey Gordon | Discrete codes for all devices except Cable and XBOX - which don't exist. |
|
|
Jon Gubman's MXF File For: HTM MX-700 (System) By: Jon Gubman | A complete system file for the following components. |
|
|
Simple System for Mom For: URC MX-900 By: Jim Hafers | After much research, and a great tip from Mike Lang, I got the Elite screen working. I happened to have an old One-for-all remote and learned the codes to that first, then to the MX-900. Might work on some other Elite screens. The remote is set up with simplicity in mind, for my mother and her boyfriend. Bulletproof, with discretes and RF. Hope this helps some people! |
|
|
David Harrison's MX-700 For: HTM MX-700 (System) By: David Harrison | This is an improved (more compact and efficient use of MX-700) file, compared to my earlier posting. In this new posting, the format of the buttons is aligned with the content of the "Guide to Simple Home Theater Operation" provided with the remote - so my family can now refer to the guide. It incorporates discrete ON/OFF for the Yamaha receiver, an on/off workaround for the old analogue Foxtel box, and a discrete off code for the Teac set top box (derived from hex code loaded into a Pronto editor, then imported). |
|
|
Tim Hatch's MX-850 For: HTM MX-700 (System) By: Tim Hatch | Complete system file with discrete power on/off and macros for the MX-850 remote. |
|
|
Kenneth Houskamp's MX-700 For: HTM MX-700 (System) By: Kenneth Houskamp | A complete system setup for the following components. |
|
|
Chuck Hutchins' MXF For: HTM MX-700 (System) By: Chuck Hutchins | A complete MX-700 setup with discrete codes. |
|
|
Roger Kaufmann's MXF Setup For: HTM MX-700 (System) By: Roger Kaufmann | A complete system MXF file with the following devices. |
|
|
More System Files: [ < Back | Next > ] Return to the Complete System Setup Files index. |