|
|
|
The following page was printed from RemoteCentral.com:
Topic: | ATTENTION MX-3000 Owners with DVD Mega-Changers!! This thread has 1621 replies. Displaying posts 931 through 945. |
|
Post 931 made on Friday June 16, 2006 at 15:57 |
Buzogany Lurking Member |
Joined: Posts: | February 2006 6 |
|
|
Bracken, in case your still checking in. I hope your doing alright! This thread hit a somber note and seems like it got a little quiet. I hope I'm not out of line by encouraging ongoing discussion until your ready to resume. I know there is a strong following here with a lot of knowledge. For any of you new users I'm sure there are still plenty of answers that can be gotten here.
Here’s one, and forgive me if it has been covered in any detail somewhere in this thread. Anyone have a hard time selling the idea of this remote to his wife? Later to find them using it all the time, being lost without it, or even showing it off to her girlfriends. Any good stories?
Tom
|
Buzz |
|
Post 932 made on Friday June 16, 2006 at 16:52 |
Darnitol Universal Remote Control Inc. |
Joined: Posts: | June 1999 2,071 |
|
|
Well folks, I want to take full blame at this point for the delay in DMX3000. Bracken was all ready to resume development on the project when I approached him to do some work for URC. Bracken's been too polite to tell everyone whose fault the delay is, so I'll be a stand-up guy and admit the truth: it's me.
However, anyone who's familiar with URC's Installer Site is already familiar with the excellent work Bracken has been doing for us.
I'll do my best not to eat up all of his free time. Believe me, I'm eager for the DMX update as well.
Sincerely, Dale
|
I'm a member of the Remote Central community, just like you! My comments here are my own, and in no way express the opinions, policies, or plans of Universal Remote Control, Inc. |
|
OP | Post 933 made on Friday June 16, 2006 at 22:46 |
triple B Active Member |
Joined: Posts: | June 2004 648 |
|
|
Hey guys, Im still around. Things got very hectic lately, and im sorry for not checking in. I have still been checking my email regularly and replying just as quickly as always.
Tom, you are definitely not out of line, keep the conversation flowing as long as possible ;)
As Dale was kind enough to point out, I havent been slacking, just havent had much time to work on DMX-3000. I will resume work on DMX-3000 just as soon as possible.
"Thank you" to everyone for your understanding.
Best Regards, 3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
Post 934 made on Monday June 19, 2006 at 21:47 |
metfoo Long Time Member |
Joined: Posts: | December 2004 28 |
|
|
Has anyone used DMX on parallels? I keep getting invalid use of null errors
|
|
OP | Post 935 made on Tuesday June 20, 2006 at 00:47 |
triple B Active Member |
Joined: Posts: | June 2004 648 |
|
|
metfoo,
Not sure I follow you, what do you mean on "parallels"?
-3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
Post 936 made on Tuesday June 20, 2006 at 07:42 |
metfoo Long Time Member |
Joined: Posts: | December 2004 28 |
|
|
www.parallels.comParallels is a x86 virtualization application. It allows you to use the VT-X enabled intel cpus, and virtualize your hardware to run a second OS at near native speeds. It is not an emulation like virtual PC. All other apps I have run in it work great, DMX though generates an error while the splash screen says getting options
|
|
OP | Post 937 made on Tuesday June 20, 2006 at 11:19 |
triple B Active Member |
Joined: Posts: | June 2004 648 |
|
|
Ahh, very cool. About the only thing that is happening during that time, is reading from the registry for simple settings and authentication of the software, which very well might cause problems. The software was never tested on such a setup.
I will help in anyway possible, but dont have a mac to test with. Hopefully someone else has run the software in this configuration and can shed some light.
Please let me know if there is anything else I can do on my end.
Regards, -3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
Post 938 made on Tuesday June 20, 2006 at 16:17 |
mikemccoy35 Lurking Member |
|
|
I was wondering what new features or changes are in store. Just something to look forward to in the future. This program has made my life so much easier when watching a dvd
|
|
Post 939 made on Tuesday June 20, 2006 at 18:56 |
metfoo Long Time Member |
Joined: Posts: | December 2004 28 |
|
|
On June 20, 2006 at 11:19, triple B said...
Ahh, very cool. About the only thing that is happening during that time, is reading from the registry for simple settings and authentication of the software, which very well might cause problems. The software was never tested on such a setup.
I will help in anyway possible, but dont have a mac to test with. Hopefully someone else has run the software in this configuration and can shed some light.
Please let me know if there is anything else I can do on my end.
Regards, -3B Is there any debug flags on the executable? I do have some programming experience, so I hopefully can help. Email me off board at edit: removed
Last edited by metfoo
on June 22, 2006 22:12.
|
|
Post 940 made on Tuesday June 27, 2006 at 16:06 |
metfoo Long Time Member |
Joined: Posts: | December 2004 28 |
|
|
|
OP | Post 941 made on Tuesday June 27, 2006 at 22:09 |
triple B Active Member |
Joined: Posts: | June 2004 648 |
|
|
Not yet, I will email you as soon as I get a chance to look at the software on a parallels setup. Still working on getting my hands on one. Once I have, as I said in the email, I will send you a couple files to test with.
Regards, -3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
Post 942 made on Friday June 30, 2006 at 06:29 |
Bracken, I have 2x Sony 777ES using your DMX software, and 2x Sony CD changers, Models 455 and 355 If I can help out with the testing please let me know.
Cheers Steve
|
|
OP | Post 943 made on Saturday July 1, 2006 at 12:44 |
triple B Active Member |
Joined: Posts: | June 2004 648 |
|
|
Thanks, as soon as I get the time to finish work on the CD section, I will be looking for a couple people to help test the new features.
It will be some time from now, I am still trying to finish up some new additions on this URC project and then I will once again be able to work on DMX.
Thanks for your willingness to help, and I appreciate everyone's patience.
Regards, -3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
Post 944 made on Tuesday July 4, 2006 at 02:16 |
I wonder if this only works on the MX3000, or if it could be edited to work on the ipronto. I know it is a different platform. What do you think?
|
Phil |
|
OP | Post 945 made on Tuesday July 4, 2006 at 17:16 |
triple B Active Member |
Joined: Posts: | June 2004 648 |
|
|
Unfortunately not, there would be no easy way of using any part of an MX-3000 file on an iPronto. Aside from just using the graphics (which are smaller than desired for the iPronto) there would be very little you would gain by starting with an RCC file as opposed to just starting from scratch.
As of now, the only other remote line I have looked at seriously was RTI, but since it is a protected line and an end-user "cant" buy the remote and software to program it with, that one was finished before it even got started.
Best Regards, -3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|