|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | ATTENTION MX-3000 Owners with DVD Mega-Changers!! This thread has 1621 replies. Displaying posts 706 through 720. |
|
| Post 706 made on Thursday November 17, 2005 at 09:41 |
Jayken Long Time Member |
Joined:
Posts: | February 2005
11 |
|
|
Hi 3B,
I mean I had my remote programed by someone else, the buttons are all there.
regards
|
|
| Post 707 made on Thursday November 17, 2005 at 10:53 |
How do I increase the delay between disc numbers that are the same.
Example: If I press "Deep Impact" which is disc 118 it goes to 18. I'm not sure where to do that.
-Dan
|
|
| OP | Post 708 made on Thursday November 17, 2005 at 11:16 |
triple B Active Member |
Joined:
Posts: | June 2004
648 |
|
|
On your controls page, there is a "Delay" button, just increase the time on that button, and all delays will be increased accordingly.
There is no specific delay assigned to repeating numbers only, but rather just a general delay used for all number presses.
-3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
| Post 709 made on Thursday November 17, 2005 at 11:32 |
Yup- that did it. I'm up and running now. Thanks Bracken, I can't wait to show the wife. Your software rocks.
I was going to get the TSU-7000, I'm glad I didn't.
Anybody still on the fence about this software. Download it now.
This message was edited by danr1707 on 11/17/05 14:10 ET.
|
|
| OP | Post 710 made on Thursday November 17, 2005 at 12:52 |
triple B Active Member |
Joined:
Posts: | June 2004
648 |
|
|
Dan,
Excellent news, glad everything is working well for you.
Definitely glad I was able to bring you over to the URC line too :-)
-3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
| Post 711 made on Thursday November 17, 2005 at 14:09 |
Update: The wife loves it. Doesn't know how we lived without it.
|
|
| Post 712 made on Thursday November 17, 2005 at 23:21 |
Jayken Long Time Member |
Joined:
Posts: | February 2005
11 |
|
|
Thanks Bracken, Your program really works well, it is more then worth the money, your support is also second to none.
regards
Jay
|
|
| Post 713 made on Friday November 18, 2005 at 00:16 |
Jayken Long Time Member |
Joined:
Posts: | February 2005
11 |
|
|
Hi Bracken,
1 problem as I was trying out the DMX3000, I click on any movie and it would only play what was in the slo t33.
regards
|
|
| OP | Post 714 made on Friday November 18, 2005 at 01:12 |
triple B Active Member |
Joined:
Posts: | June 2004
648 |
|
|
Jayken,
If you could email me your XML file and your Base RCC, I should be able the tell you what your problem is.
-3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
| Post 715 made on Friday November 18, 2005 at 09:39 |
Jayken Long Time Member |
Joined:
Posts: | February 2005
11 |
|
|
Triple B,
Files are sent to you, also I get this message"More then one Dmx-3000 device found.make sure you are runing it on base file"
regards
Jay
|
|
| Post 716 made on Friday November 18, 2005 at 10:28 |
J0nnyBrav0 Lurking Member |
Joined:
Posts: | November 2005
7 |
|
|
|
| OP | Post 717 made on Friday November 18, 2005 at 12:01 |
triple B Active Member |
Joined:
Posts: | June 2004
648 |
|
|
@Jay: I will take a look at your files as soon as I get home from work @JonnyBravo Please goto www.triplebsoftware.com. you can get a full 24 Disc working demo there. If you have any other questions, please let me know. -3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
| OP | Post 718 made on Friday November 18, 2005 at 12:29 |
triple B Active Member |
Joined:
Posts: | June 2004
648 |
|
|
Jay,
I had a moment to look at your files, you saved over your original base file, with the DMX file, so you no longer have a base file at all, but rather just two DMX files.
You will just need to open the BaseRCC, and delete all "DMX ***" devices, EXCEPT the "DMX 3000". Save this file as your Base File, and dont touch it again. When you run DMX-3000 it will create a Base_DMX.rcc file. DO NOT save this over your original Base.rcc
The macros are all correct in the files you sent me, the remote should be loading the appropriate slot numbers, if not, just test the number buttons manually to ensure that the IR codes being sent are correct for your changer.
Please let me know if you have any other problems, I would be more than happy to call you again this evening if need be.
-3B
|
Author of DMX-3000, Disc Managing Software for the MX-3000 Touchscreen http://www.triplebsoftware.com/ |
|
| Post 719 made on Saturday November 19, 2005 at 13:10 |
Jayken Long Time Member |
Joined:
Posts: | February 2005
11 |
|
|
Thanks Bracken,
I could not have done it without your support. I started off from square one, and it is working out fine for me now.
regards
Jay
|
|
| Post 720 made on Wednesday November 23, 2005 at 07:02 |
New to MX-3000 Lurking Member |
Joined:
Posts: | November 2005
1 |
|
|
Love to try it, I have DVD Profiler 2.5b, great program. But no Mega changer just yet, which changer has been tested with this software?
cheers
Ed
|
Denon AVR 5803, Sony KP61HS30, Sony VPLHS-50, Toshiba SD-9200, SA Explorer 8000HD, ExpressVu 6100HD |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
