Your Universal Remote Control Center
Consumer Electronics Control Wiki
Up level
Up level
The following page was printed from


This Wiki entry is maintained by Remote Central members - so if you spot an error or have additional information, please update it!

Basic Information
Device Type:Television
Model Year:Unknown
Configurations:Search the file area
Notes:IR "gotcha" - This model has two HDMI inputs; 2A and 2B. There is only an IR command for "Input 2" and it will only toggle between the two. The only workaround is to go to a known input such as PC, then issue the correct number of "Input" commands for your situation. There is discrete RS232 control of these inputs, as well as aspect ratio and volume level presets 0%, 20%, 40%, 60%, 80%, 100% (assuming you have added speakers to this commercial monitor)
Control Capabilities
Input Options
IR Input Jack:No
Radio Frequency:No
RS-232 (Serial):Yes
Network IP:No
DC Trigger:No
Output Ports
IR Output Jack:No
RS-232 Output:No
DC Trigger:No
Operation & Behavior
Discrete Codes
Sound Modes:N/A
Picture Modes:N/A
Screen Modes:No
Power On:4.00 seconds
Switch Inputs:N/A
Important Codes & Commands
No codes have been added for this model.
File Attachments
No files have been uploaded for this model.
Use the red Wiki Toolbox below to upload a file!

Return to Panasonic or Televisions...

About this page...
This page contains information on how the Panasonic TH-42PH11UK can be controlled, along with useful tips, tricks and commands to make integrating this device into a universal remote control or other control system faster and more reliable.

Wiki Toolbox

This entry was last updated on Thursday June 4, 2009 at 21:30 by jimstolz76.
Hosting Services by ipHouse