I noticed that as well. I compared the IR codes of the signals and noted some similarties, but no definite match. Anyway, hope they were useful!

SanMan

I have a Sony KV-32FS12 which has 4 video inputs but the remote that came with it does not have any controls. Is there a way to find codes that will allow direct change rather than moving from vid 1, 2, 3, and 4?

Also as a beginner, I need detailed help.

I too have an STRDB940 and would like a copy of your codes.

Please could you email them to me.

Cheers mate !!

[email protected]

mogur2

sorry, been out of commission for a bit. have you tried the discrete inputs listed on this site? they may do exactly what you need!

SanMan

macdat,

it's in the mail!

SanMan

I sent SanMan's new codes to my friend with the Sony receiver and he confimed that the UNIT ONE codes for MUTE ON and MUTE OFF do work with the STR-DA333ES.
YIPPEE!!!!!!!!
THANKS AND APPLAUSE to SanMan!!!! We can now reprogram some Pronto workarounds for his system to be more graceful.
I hope someone will add these new codes here to the Sony section of the DISCRETE CODES files, if not already done.

Wade:

How did you discover the discrete mute codes?

By the way, they're very useful codes. It's made my ccf even more bomb-proof.

Please email to discrete Sony mute codes to me as well at [email protected].

Many thanks

By the way, I could not find the codes in the Dicrete Codes section. Have they been uploaded elsewhere?

Wade,

I would appreciate the discrete code for the mute as well as the others.

My other quest is for the ability to switch the AUDIO only component of the DVD Video source. This to to allow video to be set to TV whatever when I listen to dts Audio only CDs. The frustrating thing is the front panel of my Sony STR-DA50ES receiver has a 3 state mode button "V", "A" or both controlling the behaviour of the rotary input selector knob. I have not found any IR codes for this button nor the rotary knob even.


A couple of days ago, I posted to this site a modified version of Geoffrey Reynolds "ProntoUtil v1.2b". Hopefuly it will appear in the "Files > Pronto > Other > Utilities > IR Programs" section soon. I added the ability to generate a CCF version of all the Function codes of a given device number. Cutting and pasting hundreds of codes into CCFPanels was such a bore in my quest for elusive IR commands. Like you, I got stuck on decoding or generating the EQ codes as they do not fit our known 5bit, 8bit or 13bit Sony patterns.

In advance, thanks.
Foxnolds

I have a KV-27FV15, also with 4 video inputs
Video 1,2, and 3 can be selected directly with discrete codes. Video 4 can easily be reached with a macro:
Video 3
Delay .1
TV/Video

You can find the hex codes for these functions at
[Link: remotecentral.com]

Note that although there is a Video 4 code, it will not work.

The other code you may find useful is Tuner, which will change directly back to the broadcast signal.

Good luck,
Joe

Have these been submitted for Pinhead's Sony IR Collection?

-Mc

Wade,
I have an older Sony STR-D2090 receiver with a RM-P321 remote. My Pronto Neo remote will not learn the "system off " button and neither of the receiver codes in the Philips book will work my receiver. I really like to use this button to make it a no brainer for the kids to be sure to turn off all of the equipment. Do you have a code that might work? Any help or advise would be appreciated.

Thanks,
Jim

I would like these codes also. Are they posted on RC yet? If not could you send them to me.

Thanks