I have tried converting all the files that I found in the files section into a Nevo configuration, but I can't find a file that will give me these discretes. the closest one I have found is this file here:

[Link: remotecentral.com]

when i convert that file, it gives me the pages and buttons, but doesnt add a device with any codes.

anyone got an idea here?

i did find a hex code for power off, apparently the sources turn the system on.

0000 006C 0000 0022 0156 00AC 0014 0014 0014 0041 0014 0014 0014 0041 0014 0041 0014 0041 0014 0014 0014 0041 0014 0041 0014 0041 0014 0014 0014 0041 0014 0014 0014 0014 0014 0041 0014 0014 0014 0014 0014 0014 0014 0041 0014 0041 0014 0014 0014 0014 0014 0041 0014 0014 0014 0041 0014 0041 0014 0014 0014 0014 0014 0041 0014 0041 0014 0014 0014 0041 0014 05DD

i'm off to the boat to try out the code. wish me luck :)

This is what is on the File you posted the link to.

Power On (Assert)
0000 006B 0000 0022 015D 00AC 0015 0015 0015 0041 0015 0015 0015 0041 0015 0041 0015 0041 0015 0015 0015 0041 0015 0041 0015 0041 0015 0015 0015 0041 0015 0015 0015 0015 0015 0041 0015 0015 0015 0015 0015 0015 0015 0041 0015 0041 0015 0015 0015 0015 0015 0015 0015 0041 0015 0041 0015 0041 0015 0015 0015 0015 0015 0041 0015 0041 0015 0041 0015 0015 0015 00AE

Power Off (Assert)
0000 006B 0000 0022 015D 00AC 0015 0015 0015 0041 0015 0015 0015 0041 0015 0041 0015 0041 0015 0015 0015 0041 0015 0041 0015 0041 0015 0015 0015 0041 0015 0015 0015 0015 0015 0041 0015 0015 0015 0015 0015 0015 0015 0041 0015 0041 0015 0015 0015 0015 0015 0041 0015 0041 0015 0041 0015 0041 0015 0015 0015 0015 0015 0041 0015 0041 0015 0015 0015 0015 0015 00AE

Notice: The Discrete Power On & Off commands above were implemented Feb. 2007. Media Centers that were shipped before that date will require a console software update. Please contact Bose at 1(800) 633-4405.

The Hex String you Posted is the POWER TOGGLE.

Thanks Jason

How were you able to convert the file? What was I doing wrong?

I tested the hex code that i posted and it seemed to be a power off command when tested, I don't think it toggled. I will have to try it out again.

Thanks

You did not do anything wrong! NevoStudio Pro does not Import Hex Codes with PCF Files only CCF Files.

I Used ProntoEdit NG to open the file and to read the Hex Code.It is a good idea to have ProntoEdit NG and ProntoEdit 4 installed.When you download CCF Files sometimes they will not be able to be Import into NevoStudio Pro,but if you open it with ProntoEdit 4 first and then save it again it will work.Do not use ProntoEdit NG when opening CCF Files because it will convert it to a PCF File.

Philips ProntoEdit v4.0.5
[Link: remotecentral.com]

Philips ProntoEdit NG
[Link: remotecentral.com]

i did try to open it in ProntoEdit 4, I see now that I should have tried opening it with ProntoEdit NG. I've never programmed a Pronto so I didnt realize there were different software versions. I downloaded ProntoEditNG and see what you did now.

Thanks for the lesson :)