|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Studio Pro 2.0 This thread has 16 replies. Displaying posts 1 through 15. |
|
| Post 1 made on Sunday January 25, 2009 at 08:26 |
bradnevo Lurking Member |
Joined:
Posts: | January 2009
8 |
|
|
i have seen a number of posts referencing the 2.0 software. From what i can tell the release candadite was released in december. Does anyone have info on when this software will be ga? Any thoughts on where i can obtain the rc version?
|
|
| Post 2 made on Sunday January 25, 2009 at 08:49 |
imac8888 Long Time Member |
Joined:
Posts: | January 2009
13 |
|
|
There is a warning that once you use the RC 2.0 to program a device, you cannot go back to 1.1 .... so if find a bug in 2.0, you are stuck with it until the final version comes out.
I have 2.0 loaded and have looked at some of my files with it, but I dont see a big difference between it and 1.1 .... since I am new to working with the process on this nevo device, I have decided not to program with the 2.0 at all yet.
Dont you have the 1.1 so you can register it and get on the mynevo site and download the 2.0 rc version?
imac
|
|
| OP | Post 3 made on Sunday January 25, 2009 at 08:56 |
bradnevo Lurking Member |
Joined:
Posts: | January 2009
8 |
|
|
My rational for the 2.0 version is totally based on Z-Wave. I have just purchased the NC-50 and a few Leviton Z-Wave lighting switches/plug-in modules. Without the 2.0 there is no “two way” control of Z-Wave devices.
I do have the 1.1 rev registered however I am not able to access the dealer login to download the new version. Maybe I’m just overlooking something?
|
|
| OP | Post 4 made on Sunday January 25, 2009 at 09:25 |
bradnevo Lurking Member |
Joined:
Posts: | January 2009
8 |
|
|
All i had to do was re-register with Nevo as an installer. I should have tried that before now!
|
|
| Post 5 made on Monday January 26, 2009 at 16:39 |
jsharpe Lurking Member |
Joined:
Posts: | February 2003
4 |
|
|
I finally got around to trying out the Z-Wave aspects of 2.0. Compared to the rest of Studio Pro the Z-Wave support seems to be missing some very basic functionality. The biggest problem I see is that Z-Wave components commands and events are not seamlessly integrated. I.e. the home control widgets can only interact with home control devices and I haven't found any way for them to do any of the normal commands such as sending an IR code or running a global macro. Similarly, the regular widgets can't interact with home control devices. ... edit: I just figured out how to accomplish some of the things listed above. Lighting scenes can be implemented in Studio Pro by creating Home Control Groups, which fortunately can also be used to add lighting control and other home control commands to normal buttons. That leaves only the ability to add normal commands (e.g. send, jump, etc.) to Home Control UI widgets as something that doesn't seem possible.
Last edited by jsharpe
on January 26, 2009 18:50.
|
|
| Post 6 made on Monday January 26, 2009 at 16:52 |
jsharpe Lurking Member |
Joined:
Posts: | February 2003
4 |
|
|
I forgot to mention that GA for 2.0 is currently scheduled for February, but until it actually happens there will always be the possibility of it slipping.
|
|
| OP | Post 7 made on Wednesday January 28, 2009 at 19:33 |
bradnevo Lurking Member |
Joined:
Posts: | January 2009
8 |
|
|
that is good news, think i wait till the end of Feb before i install the beta. I would rather have the GA release.
Intresting that you can not add normal commands like "jump" and what not to the widgets.
|
|
| Post 8 made on Thursday January 29, 2009 at 02:38 |
openendstraight Long Time Member |
Joined:
Posts: | December 2007
109 |
|
|
I log on to the Nevo site, and I only see the Studio Pro 1.1 download. Am I missing something?
|
I spent all my money on cigars, liquor, and golf. The rest I wasted. |
|
| Post 9 made on Thursday January 29, 2009 at 07:01 |
sydinstaller Active Member |
Joined:
Posts: | February 2004
740 |
|
|
Yes......
Are you sure your in the correct site? Directly under the 1.1 link, in bright orange is a box that says "TRY 2.0"
|
|
| Post 10 made on Thursday January 29, 2009 at 14:06 |
Droo Long Time Member |
Joined:
Posts: | March 2007
162 |
|
|
On January 26, 2009 at 16:39, jsharpe said...
I finally got around to trying out the Z-Wave aspects
of 2.0.
Compared to the rest of Studio Pro the Z-Wave support
seems to be missing some very basic functionality. The
biggest problem I see is that Z-Wave components commands
and events are not seamlessly integrated. I.e. the home
control widgets can only interact with home control devices
and I haven't found any way for them to do any of the
normal commands such as sending an IR code or running
a global macro. Similarly, the regular widgets can't
interact with home control devices. ...
edit: I just figured out how to accomplish some of the
things listed above. Lighting scenes can be implemented
in Studio Pro by creating Home Control Groups, which fortunately
can also be used to add lighting control and other home
control commands to normal buttons. That leaves only
the ability to add normal commands (e.g. send, jump, etc.)
to Home Control UI widgets as something that doesn't seem
possible. Any of the lighting scenes can be implemented into a Macro along with normal commands such as Send, Jump and If/Then Statements. D
|
Drew
PMAV |
|
| Post 11 made on Thursday January 29, 2009 at 14:12 |
openendstraight Long Time Member |
Joined:
Posts: | December 2007
109 |
|
|
On the Nevo site under downloads.
It brings up everything except the Studio Pro 2.0
Looks like this
NevoStudio Pro
NevoStudio Pro 1.1 Software
Design Guide
Installer Data Sheet
Quick Start - Using Sample Configurations
Quick Start - Creating New Configurations
Quick Start - Adding a NevoConnect NC-50
Initial Installation Quick Start Guide
Update Installation Quick Start Guide
|
I spent all my money on cigars, liquor, and golf. The rest I wasted. |
|
| Post 12 made on Thursday January 29, 2009 at 14:50 |
jsharpe Lurking Member |
Joined:
Posts: | February 2003
4 |
|
|
On January 29, 2009 at 14:06, Droo said...
Any of the lighting scenes can be implemented into a Macro
along with normal commands such as Send, Jump and If/Then
Statements. Yes, but only a single Home Control action can be set for any of the newly added Home Control UI widgets (although that one action can be for a HC group). If you've found a way to add a normal command such as Send, Jump, etc to a Home Control UI widget please share how you managed it.
|
|
| Post 13 made on Thursday January 29, 2009 at 18:08 |
sydinstaller Active Member |
Joined:
Posts: | February 2004
740 |
|
|
openendstraight, I think this is a case of looking to hard. On the first page that is shown once you have logged in, there is a big box on the right hand side that says "Nevo Studio Pro 1.1" "begin downloading". Under that is the big orange box that says try 2.0. [Link: mynevo.com]D
|
|
| Post 14 made on Thursday January 29, 2009 at 19:20 |
openendstraight Long Time Member |
Joined:
Posts: | December 2007
109 |
|
|
On January 29, 2009 at 18:08, sydinstaller said...
openendstraight, I think this is a case of looking to hard. On the first page that is shown once you have logged in, there is a big box on the right hand side that says "Nevo Studio Pro 1.1" "begin downloading". Under that is the big orange box that says try 2.0. [Link: mynevo.com]D I tried that, but it will not download. It takes me to a screen to tell them what I think of 2.0. It as for name, e-mail, ect. I put it in and nothing.
|
I spent all my money on cigars, liquor, and golf. The rest I wasted. |
|
| Post 15 made on Friday January 30, 2009 at 07:28 |
sydinstaller Active Member |
Joined:
Posts: | February 2004
740 |
|
|
Sorry I don't know how else to help.
It works for me.
Fill out the form.
D/L starts.
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
