|
|
|
The following page was printed from RemoteCentral.com:
Topic: | IP Controllable devices This thread has 28 replies. Displaying posts 16 through 29. |
|
Post 16 made on Monday November 1, 2010 at 19:33 |
NSP01 Advanced Member |
Joined: Posts: | March 2005 834 |
|
|
Add the Pioneer VSX-1120 to all current Elite receivers (except the SC-09TX). IP port is 23 or 8102 which the iPhone app uses. Current Blu-ray players use port 8102 only.
|
They call me the "Thread Killer". Just watch! |
|
Post 17 made on Friday November 12, 2010 at 08:40 |
Buzz Goddard Long Time Member |
Joined: Posts: | August 2004 395 |
|
|
All of NetStreams DigiLinX line (it is native IP).
Our Musica line, although analog, can be IP controlled via the R2EM adaptor.
|
|
|
Post 18 made on Sunday January 30, 2011 at 23:46 |
uavtech Lurking Member |
Joined: Posts: | January 2011 1 |
|
|
Does anybody have the protocol doc for Yamaha's IP control? (RX-V2065 specifically)....
Thanks!
|
|
Post 19 made on Monday January 31, 2011 at 16:42 |
Drabert Long Time Member |
Joined: Posts: | October 2008 132 |
|
|
Extron MAV Plus matrix switchers with IP Link are IP controllable :) great for distributed audio!
|
|
Post 20 made on Wednesday April 20, 2011 at 13:01 |
majortom64 Lurking Member |
Joined: Posts: | September 2010 8 |
|
|
On January 30, 2011 at 23:46, uavtech said...
Does anybody have the protocol doc for Yamaha's IP control? Did you ever get this? I am looking for the z7's IP control protocol.
|
|
Post 21 made on Tuesday August 16, 2011 at 21:50 |
tomi1122 Lurking Member |
Joined: Posts: | December 2007 3 |
|
|
Problem with that unit is that it shuts down all ports when it enters standby so you cannot POWER-ON through IP or its internal web pages - despite them having POWER-ON option.
Second, for true IP control it requires telnet session to port 23 (default telnet port). Your hope is that whatever is issuing these commands will keep the session open and not close it with every request (e.g.: volume up) otherwise you will have delay between commands of around 10ms or more to establish TCP session (expensive) and the a telnet session (not too bad).
Tom
|
|
Post 22 made on Thursday August 18, 2011 at 05:20 |
wall-e Long Time Member |
Joined: Posts: | September 2008 55 |
|
|
Indeed,
Especially the energy savings functions are terrible.. Falling back on rs232 in most cases because it's much more stable. Also, some IP devices support only 1 connection at a time. With feedback, it will only talk to 1 device.. While Globalcache serves up to 4 devices..
|
|
Post 23 made on Saturday August 20, 2011 at 03:33 |
gopronto Senior Member |
Joined: Posts: | April 2008 1,453 |
|
|
i agree with Wall-e, most of the devices can not be switched on with ether net
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
Post 24 made on Sunday October 9, 2011 at 12:20 |
Greetings,
I am playing with IP control of some Yamaha devices now using RTI T2-C+ and XP-3/XP-6. Some comments regarding posts in this forum:
1. yes, the RX-A3010, -A2010, -A1010 are IP controllable; the format for the commands are found on the Yamaha PAB website (login required) 2. Yamaha's new Blu-ray player BD-A1010 is IP controllable 3. Yamaha supports YNCA and YNC - Yamaha Network Control and YNC Alias. YNC is Ethernet only; YNCA is Ethernet + RS-232. YNCA is far simpler to use, where YNC is a complex command structure (complex for A/V gear) 4. YNC supports 4 (more for higher-end models) simultaneous connections; YNCA only 1 5. The BD-A1010 apparently only supports YNC for Ethernet; that's the only doc I find on Yamaha PAB 6. there are RS-232 commands for the BD-A1010, and it has an RS-232 port
Now the rant: I am spending a lot of time to try to get a set of Ethernet commands to control the Yamaha A/V receivers and BD-A1010 over Ethernet. I have the following reasons:
1. ashamed to use 1960's RS-232 in the year 2011 [I mean, really?] 2. those devices are already on the network for content; why more connections? 3. serial port support on controllers, even just the cables, gets pricey: see #2 4. it's much quicker and ought to be more reliable 5. it's the future (can't believe I'm saying that in 2011) 6. it offers valuable feedback in terms of meta-data, even just for volume level, not to mention songs from iPods, HD radio, Internet Radio, etc. 7. I've got to bite the bullet sometime, and I prefer to be ahead of the curve to build my experience
My initial experience with the BD-A1010 proved formidable, but I have strings that work. It was counter-intuitive to me (and I've done IT 30+ years), but these devices really are mini-servers now. You have to take the 140-or-so character XML command structures and preface them with another 100 or so HTTP PUT command headers. Not sure my beta-like drivers for RTI (of course not officially published) are going to handle this, but I'm going to try. Would love to find a small, simple and free HTTP POST generator, but I've done it by hand so far.
I will post further on a specific Yamaha-IP topic I'll either jump on or start. It took me so long to get here, and I rely on these forums a lot, so I feel obligated to share.
Good luck to all who play with this.
|
Enjoy your media! [email protected] |
|
Post 25 made on Sunday October 9, 2011 at 12:27 |
Greetings,
One more point about something I read here: not sure when it started, but the RX-Ax010 models support Network Standby, and I've successfully turned on my RX-A3010 from an IP command.
I am overjoyed that our cutting-edge A/V technology is catching up to latter-day twentieth century functionality. I hope it's not too far away when they're fully 21st century compliant.
|
Enjoy your media! [email protected] |
|
Post 26 made on Saturday April 7, 2012 at 21:38 |
The DirecTV TiVo THR22-100 is IP controllable, but falls in to the catagory of only 1 IP connection at a time.
|
|
Post 27 made on Saturday May 5, 2012 at 11:37 |
ADA Mach IV and Suite 7.1 a/v processors IP controllable (have a Crestron module for them)
|
|
Post 28 made on Monday June 18, 2012 at 13:55 |
DistinctAV Long Time Member |
Joined: Posts: | January 2007 20 |
|
|
New http://www.LumenCache.com LED Lighting system will have an IP interface as well as a programmable cloud app interface via http://www.electricImp.comDriver/interface developers should use the Contact Us page and check the Dealer/Installer/Integrator in the drop-down list. The MainBrain should be available in January for large integration projects. For Ernie's full disclosure sake: I am Derek Cowburn, owner of DistinctAV and Founder of Lumen Cache, Inc. Sorry Ernie, I didn't use a new LumenCache account when I posted this. Lot's to do so no time for this ego silliness. :-)
Last edited by DistinctAV on June 18, 2012 14:56.
|
|
Post 29 made on Thursday June 21, 2012 at 12:25 |
Barry Gordon Founding Member |
Joined: Posts: | August 2001 2,157 |
|
|
I have a fairly complete set of protocol docs for Yamaha. I have no Yamaha equipment so I have no experience with them. eMail me if you want a set of the docs I have.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|