Post 1 made on Friday January 22, 1999 at 23:20 |
I just purchased the Iriq, I think it is a nice piece of equipment, BUT I am having problems with the software package. The editor will not recognize the remote when connected.
The port works, because I use the same port for my digital camera and palm pilot, so I am wondering if I have some kind of defective product or am I doing something wrong? Any help would be appreciated.
I used the set-up wizard and all of my equipment works except for my onkyo cd player(I am putting a call into Onkyo Monday)
Thanks Marc
|
|
OP | Post 2 made on Wednesday January 27, 1999 at 01:41 |
Make sure your not getting a IRQ conflict. I had to make sure I didn't get a conflict with my modem port - sharing IRQ's & couldn't be online at the same time I tried to communicate with IRIQ.
Good Luck! I sure like mine...
|
|
OP | Post 3 made on Thursday January 28, 1999 at 17:51 |
Gordon Martin Historic Forum Post |
|
|
Better check the Palm Pilot end of things...
If I remember correctly, the Palm Pilot has some computer software that constantly runs in the background of your PC waiting for the appearance of the Palm Pilot Unit itself.
When you press the link button on your Pilot this software should come up automatically and start syncing the two units.
This software is probably holding onto the serial port and checking for the press of the button - and probably interfering with your unified remote.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.