|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | TSU7000 & iMon HTPC w/MediaPortal This thread has 39 replies. Displaying posts 16 through 30. |
|
| OP | Post 16 made on Wednesday May 9, 2007 at 10:42 |
gusangora Long Time Member |
|
|
On May 9, 2007 at 09:55, blickey said...
Hey Mate, I know this isn't relevant to this thread but i am having trouble trying to set up my IMON remote with MEdiaportal. I read a thread of yours from a while back and you wrote that you have a .imo file to add all the settings for mediaportal to the IMON remote set up. Is there any way you could send me that file or help me out trying to set up my IMON remote with MEdiaportal? Any help would be awesome. You can message me or email me at [email protected]Thanks a lot. You have mail.
|
|
| Post 17 made on Wednesday May 23, 2007 at 05:36 |
Hi guys, Can you please send me the IMON config file for MediaPortal too? [email protected]Cheers, Dan
|
|
| Post 18 made on Friday June 15, 2007 at 05:30 |
Hi,
I also have the iMon pad remote but am having no luck learning the buttons. A couple work but most do not and learning the joypad directions actually causes my tsu7000 to hang!
Could someone send me a PCF with the codes in? You'd be a life saver.. :)
|
|
| OP | Post 19 made on Friday June 15, 2007 at 11:08 |
gusangora Long Time Member |
|
|
|
| Post 20 made on Friday June 15, 2007 at 20:35 |
Thanks gusangora, The pad direction codes are working now which is great.
I'm getting a nasty delay though, and sometimes I have to press twice before the PC reacts. Is that normal?
Stupid question, but what are the .imo files for? Are they for Win Media Center?
I found a pdf of the imon ir spec on a different thread so I'm going to try a decipher these codes today. I have the hex codes for each command that the VFD recieves from my linux config files. They are all like '0x289395B7' but I should be able to translate them somehow.. we'll see.
|
|
| Post 21 made on Tuesday June 26, 2007 at 08:48 |
Well it took longer than I'd hoped but I finally deciphered the hex codes. I though I'd write a quick note for the benefit of anyone struggling as I was..
Took me a while before i realised that each burst pair defines Nx0s and Mx1s with the duration of the on and off bursts defining N and M , i.e on for 11 = 0, 31 = 00, 51 = 000, then off for 31 = 1, 51 = 11, 71 = 111 etc with the hex numbers increasing by 32 (in decimal) for every extra digit.
So: 0031 0051 0011 0071 = 00110111
lucie_fear's Excel sheet from the 'iMon HTPC Integration with TSU7000' thread was a big help... once I understood it :)
I've generated clean codes for all the buttons with repeats and they're working well.
Getting the repeat working for the pad was a pain. A note for anyone else trying.. the code needs to be repeated twice in Burst Pair Sequence 1 and just once in Sequence 2.
Anyway, to all who have posted about the iMon, thanks for the help.
|
|
| Post 22 made on Tuesday June 26, 2007 at 13:27 |
PaulH2 Long Time Member |
Joined:
Posts: | April 2007
24 |
|
|
On June 26, 2007 at 08:48, putin said...
I've generated clean codes for all the buttons with repeats
and they're working well. Would it be possible to get a copy of your configuration file please? I'm still struggling to get my TSU7500 working reliably with the iMon. Thanks, Paul
|
|
| Post 23 made on Tuesday June 26, 2007 at 18:22 |
You have mail. Let me know how you go.
|
|
| OP | Post 24 made on Wednesday June 27, 2007 at 09:29 |
gusangora Long Time Member |
|
|
Hello,
I too would like to try your codes.
I still occasionally have an issue whereby a remote code is 'double' sent, that is, the function occurs twice with a single press. It's only very occasional but can be annoying when it's the 'pause' button that it effects (the screen pauses for a second or two and then resumes again). Luckily, it is infrequent.
This issue only occurs with Mediaportal, not Vista Media centre.
Thanks,
Steve
nb the .imo file was for use with Mediaportal.
|
|
| Post 25 made on Wednesday June 27, 2007 at 18:26 |
You have mail, hope it helps.
|
|
| Post 26 made on Tuesday July 3, 2007 at 22:43 |
Hi Putin
I would greatly appreciate a copy of the IMon Codes. I'm having a heck of a time getting the codes into My Pronto.
Thanks in advance
|
|
| Post 27 made on Tuesday July 3, 2007 at 22:55 |
OK, I'll send you what I have when I get home.
To be honest I'm finding it still needs a little work. I think the timing of the mouse commands are a bit off.
Once I'm happy with it I'll upload to the files section.
|
|
| Post 28 made on Monday July 9, 2007 at 18:49 |
PaulH2 Long Time Member |
Joined:
Posts: | April 2007
24 |
|
|
Just to let you know, I tried those codes and along with the new beta iMon software (not yet publically available, you have to ask) now have full control over Vista 64-bit Media Centre!
Thanks very much,
Paul
|
|
| Post 29 made on Tuesday July 10, 2007 at 22:56 |
No problem. Glad to hear it.
|
|
| Post 30 made on Sunday August 19, 2007 at 14:16 |
funckey Long Time Member |
Joined:
Posts: | December 2005
12 |
|
|
Hi,
Possible to get a copy of your work?
Regards
//Peter
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
