Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
MCE control in RF
This thread has 3 replies. Displaying all posts.
Post 1 made on Friday February 17, 2006 at 21:37
mj_ewing
Lurking Member
Joined:
Posts:
September 2004
9
I recently added a Media Center Edition equiped computer to my set-up. The media center remote codes have all been learned and programmed into my set-up. All components (including the new computer) are in a cabinet and controlled with the Pronto RF controller. Unfortunately while all buttons will work when pressed, a single button won't repeat when pressed again. (i.e. a button cannot be pressed twice in a row).

Any advice?
Post 2 made on Friday February 17, 2006 at 23:15
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
13,016
It's called a "toggle bit". Search the Pronto, not Pronto NG forum for +360 +toggle +bit and you'll find a very recent thread discussing this issue as well as links to CCFs to help get around this problem.
Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 3 made on Sunday February 19, 2006 at 10:26
Martin Clark
Long Time Member
Joined:
Posts:
November 2003
31
Actually if it helps, you install TweakMCe and set it to allow/disallow universal remote (Whatever the setting is it will be the opposite of what you find doesn't work for you now). You will find then that toggle bits are unecessary
OP | Post 4 made on Wednesday February 22, 2006 at 19:58
mj_ewing
Lurking Member
Joined:
Posts:
September 2004
9
On February 19, 2006 at 10:26, Martin Clark said...
Actually if it helps, you install TweakMCe and
set it to allow/disallow universal remote (Whatever
the setting is it will be the opposite of what
you find doesn't work for you now). You will find
then that toggle bits are unecessary

Thank you both so much for your responses -- I installed TweakMCE and in my case the trick was that I had to "DISABLE universal remotes" and then reboot to make this work. But it does.

Thanks again


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse