Post 1 made on Friday January 29, 1999 at 04:11 |
BOULLAND Daniel Historic Forum Post |
|
|
Hi, it seems there is a GO command for the macros... is it mentionned on the user guide?? how do i tell this command to the pronto?? thanks so much... Friday 29th and still no prontoedit... philips, come on give us our candy.. ;-)) Daniel
|
|
OP | Post 2 made on Friday January 29, 1999 at 08:21 |
gordinh Historic Forum Post |
|
|
Daniel;
The GO command is issued during the writting of the Macro by bringing up the device list, holding down the right button, and selecting the Device you want to end the Macro with. There will be only 1 GO command in your Macro (maybe that is different with prontoedit..wait..wait..wait..)and it will be the last command. This allows you to issue your Macro, and have the screen for the selelcted device visible when the Macro ends. The way it works now, you will be on Page 1 of the Device. I've heard that is also different with Prontoedit.
Hope that helps, good luck
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.