Post 1 made on Monday January 4, 1999 at 13:04 |
mike willey Historic Forum Post |
|
|
I have followed the directions in the manual to assign my left and right buttons as well as the mute, channel + -, and volume + -, but they will not work on a global basis, they work when I am on the home page and the mute and channel buttons work on the TV screen but thats it. the left and right buttons only work from the home page. I relabeled these on the home page and the new label does not follow to the other screens, i.e. tv, dvd, etc.. anyone have a cure for this or some info I am not getting correct? thanks in advance!
|
|
OP | Post 2 made on Monday January 4, 1999 at 13:21 |
jack schultz Historic Forum Post |
|
|
Mike, My guess is that there is something programmed in these buttons on the other devices by default. The global function works based upon no other programming being done. One fix would be to go in and teach in each of the modes. Another fix will be to use the software when it releases as this will also allow you to "see" what's in those buttons on teh other device screens. I hope this helps.
|
|
OP | Post 3 made on Monday January 4, 1999 at 15:12 |
Daniel Tonks Historic Forum Post |
|
|
Mike: Yes, I feel Jack is correct - try DELETING the channel / volume buttons on a component and seeing if your global signals work.
|
|
OP | Post 4 made on Monday January 4, 1999 at 16:44 |
mike willey Historic Forum Post |
|
|
Jack and Daniel - Many thanks for the replies. I will give the solutions a try tonight!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.