| Post 1 made on Monday January 23, 2006 at 05:26 |
Peter Black Long Time Member |
Joined:
Posts: | January 2006
18 |
|
|
When I first plugged in the new Nevo, after about 3 hours the blue light at the front of the unit went out. I assumed that this meant that it was fully charged.
After picking it up from the cadle and checking out the "tutorial" I replaced it into the cradle. That was more than 24 hours ago and the blue light at the front of the nevo itself is still burning brightly.
Is this normal or is it the sign of a problem?
|
Peter |
|
| Post 2 made on Monday January 23, 2006 at 10:17 |
ckelly33 Long Time Member |
Joined:
Posts: | April 2004
254 |
|
|
Mine has never gone out. Maybe you had poor contact between the base and the Nevo the one time you saw it go out.
|
|
| Post 3 made on Monday January 23, 2006 at 15:49 |
Stealth X Senior Member |
Joined:
Posts: | November 2005
1,177 |
|
|
i would agree with the above statement, as the light stays on as long as the Nevo is on the cradle.
|
|
| Post 4 made on Monday January 30, 2006 at 12:20 |
griffin6601 Lurking Member |
Joined:
Posts: | January 2004
4 |
|
|
A switch is located on the bottom of the NevoSL charging cradle. Sliding the switch will turn off the cradle’s lighting when NevoSL is placed in the cradle. Turning the lighting will not not disable charging of NevoSL. It is not possible to turn off the clue charging indicator on NevoSL.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
