Post 1 made on Sunday February 8, 2009 at 14:03 |
kieran2008 Long Time Member |
Joined: Posts: | October 2008 12 |
|
|
hello guys.........hope all well
one has a slight problem and basically asking for some help regarding this technical hickup
i decided to update firware all the updates were ticked boot.rom nevo etc etc.. but the blaster firmware failed leaving me with no blaster working...
everything all seems ok apart from the blaster, it shows its working by the red bands, but when i go to update firware, it shows no previous version only whats available which everytime i go to update it fails
i really would appreciate some help as ive spent hrs perfecting the design etc
thankyou in advance
kieran
|
|
Post 2 made on Sunday February 8, 2009 at 16:47 |
sydinstaller Active Member |
Joined: Posts: | February 2004 740 |
|
|
I have had this happen when trying to update all the f/w's at the same time.
The best way is to do each f/w one at a time.
Try starting at the top and working down. Re-flash all of them.
D
|
|
Post 3 made on Sunday February 8, 2009 at 21:30 |
BetterWay Long Time Member |
Joined: Posts: | December 2008 22 |
|
|
While the firmware is updating you need to keep the remote from falling asleep. You can set the time to sleep in advance to five minutes through programming or just keep touching one of the hard keys until all the firmware updates are complete.
I finally figured this out very late one night at the end of a very frustrating day
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.