|
|
|
UEI Nevo Remote Controls Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Q50 problem This thread has 20 replies. Displaying posts 1 through 15. |
|
Post 1 made on Friday January 25, 2008 at 10:36 |
anmetcalf Long Time Member |
Joined: Posts: | January 2008 20 |
|
|
I got my Q50 today and have to say it is much more user friendly than the 3000 series pronto I was using. Plus the software is much much better if you ask me.
I am having one small problem though. After I got done creating my setup I installed it and at first I couldn't get my DVR functions to work. Everything appeared alright but when I hit button I got a small caution triangle at the top of the screen. What I ended up doing is redoing the dvr setup and reinstalling it and it worked fine.
Now though I am having the same problem with my xbox 360 functions. I have tried redoing them with no luck. they still don't work and I still and getting a caution triangle at the top of the screen. Everything else works wonderful. I know it is just my xbox but I figured I want everyhting on this remote. Anyone have any ideas?
thank you in advance
|
|
Post 2 made on Friday January 25, 2008 at 12:58 |
yatch Long Time Member |
Joined: Posts: | March 2003 42 |
|
|
Are you using the NC50? If so, it sounds like your NC50 and Q50 are losing their connection.
Mark
|
|
OP | Post 3 made on Friday January 25, 2008 at 16:33 |
anmetcalf Long Time Member |
Joined: Posts: | January 2008 20 |
|
|
No I am not using the NC50
|
|
Post 4 made on Friday January 25, 2008 at 19:21 |
Ry-dog Long Time Member |
Joined: Posts: | July 2005 169 |
|
|
Then maybe you accidently assigned your Xbox to a NC-50 basestation in NevoStudio Pro even though you don't really have one. As far as I'm aware, the only time you should see the warning symbols are if the command didn't go through to the base station (NC-50).
I would double check your configuration and make sure you don't have anything listed in the Nevo Ecosystem tab (in the upper right corner of the screen).
|
|
OP | Post 5 made on Friday January 25, 2008 at 22:19 |
anmetcalf Long Time Member |
Joined: Posts: | January 2008 20 |
|
|
I have nothing in the ecosystem tab.
Any other ideas?
|
|
Post 6 made on Sunday January 27, 2008 at 06:48 |
sydinstaller Active Member |
Joined: Posts: | February 2004 740 |
|
|
What codes are you using? Are they from the database, did you learn them or Paste them as Hex?
|
|
OP | Post 7 made on Sunday January 27, 2008 at 09:58 |
anmetcalf Long Time Member |
Joined: Posts: | January 2008 20 |
|
|
they are from the data base. I even tried them because there were 2 possible codes I could use. I found the one I wanted when I tested them and went with that one.
|
|
Post 8 made on Sunday January 27, 2008 at 15:12 |
ddarche Mr. RemoteQuest |
Joined: Posts: | February 2002 2,309 |
|
|
Make sure you are on the latest version of NSPro and check for a firmware update for the Q50.
Might fix everything.
Dave
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
Post 9 made on Monday January 28, 2008 at 02:25 |
sydinstaller Active Member |
Joined: Posts: | February 2004 740 |
|
|
Are you able to Email me the Nevo Job file?
|
|
OP | Post 10 made on Monday January 28, 2008 at 12:57 |
anmetcalf Long Time Member |
Joined: Posts: | January 2008 20 |
|
|
|
Post 11 made on Monday January 28, 2008 at 18:59 |
sydinstaller Active Member |
Joined: Posts: | February 2004 740 |
|
|
Hi anmetcalf,
I have been looking at your job. Hmmmmmm.
Something is very wrong here. It looks like something is possibly corrupt?
If you start a new job and just add the Xbox does it work? It did for me. When I copy the working files into your job they stop working. Hmmmmmm.
I have sent the file to UEI for evaluation. Hopefully I will have an answer soon.
Stay tuned.
|
|
Post 12 made on Monday January 28, 2008 at 21:07 |
yatch Long Time Member |
Joined: Posts: | March 2003 42 |
|
|
I'm straying off topic a bit, sorry......ddarche, I checked last night and have yet to see a software/hardware update. How recent is the update you are referring to?
Thanks,
Mark
|
|
OP | Post 13 made on Monday January 28, 2008 at 22:43 |
anmetcalf Long Time Member |
Joined: Posts: | January 2008 20 |
|
|
thanks sydinstaller, I do appreciate it very much. I am going to try making a new one in the next couple of days or so. There is something else wrong as well because on some screens it will leave the backlight on until I leave that screen. Then when I go back to that screen it is fine. got me puzzled.
|
|
Post 14 made on Tuesday January 29, 2008 at 05:29 |
sydinstaller Active Member |
Joined: Posts: | February 2004 740 |
|
|
What pages is that happening on?
Ill check it out on mine.
|
|
OP | Post 15 made on Tuesday January 29, 2008 at 08:33 |
anmetcalf Long Time Member |
Joined: Posts: | January 2008 20 |
|
|
dish network digits, I know is one and it has done it on other, but not all the time.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|