Post 1 made on Saturday March 3, 2007 at 12:56 |
pat17 Long Time Member |
Joined: Posts: | August 2005 13 |
|
|
I there,
I'm very happy with my NevoSL, especially as it works far better with my old Harman/Kardon Signature products than the Pronto I had before.
I just have a (small) problem with it - when I take it, and activate the screen, I notice that the time given in the upper right corner is often wrong, being late of various times but usually between 30 and 45 minutes. After I use the remote for a few seconds, the correct time is updated.
Anyboday has noticed that? Is there anything that can be done to fix it?
Thanks in advance...
|
|
Post 2 made on Saturday March 3, 2007 at 22:55 |
lalartu Long Time Member |
Joined: Posts: | August 2006 44 |
|
|
Sounds normal to me. When the remote goes into sleep mode the clock stops. My Nevo takes a few seconds to update the clock when using it after sitting idle or charging.
|
|
Post 3 made on Sunday March 4, 2007 at 14:44 |
karmann Active Member |
Joined: Posts: | November 2004 538 |
|
|
I have a client with that problem but the time won't fix untill a reset. The battery level stops updating at the same time as well.
I've been told this is a know problem, but no fix yet.
|
|
OP | Post 4 made on Monday March 5, 2007 at 05:12 |
pat17 Long Time Member |
Joined: Posts: | August 2005 13 |
|
|
Thanks for your answers, lalartu and karmann...
If there's nothing to do about it, let's live with it!!
Thanks again.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.