| Post 1 made on Monday February 19, 2007 at 17:17 |
szhjcn Long Time Member |
Joined:
Posts: | January 2007
39 |
|
|
Hi,
Does anyone know how to get the Hex codes out of a Nevo SL ??
We want to try to work out the descreet codes for devices, but can't do this without being able to view the IR learnt with the device.
Cheers
Neil
|
Home Automation: www.imaxis.ch |
|
| Post 2 made on Tuesday February 20, 2007 at 10:04 |
Marky_Mark896 Select Member |
Joined:
Posts: | January 2004
1,545 |
|
|
The only way to do it is to learn it to another remote like a pronto, and view it through the other remote's software. I had to do this a while ago to send codes to Nevo for them to look at codes that were running away constantly.
|
It's not just a hobby, it's an obsession... |
|
| OP | Post 3 made on Tuesday February 20, 2007 at 10:33 |
szhjcn Long Time Member |
Joined:
Posts: | January 2007
39 |
|
|
Hi,
Thanks for your reply. The problem was that the NevoSL learnt the codes correctly from a remote, but our new Pronto TSU9600 would not learn all the codes.
I have since found the codes in a CCF on another website, so the problem for now is solved. But it seems crazy that they don't allow this. I can understand blocking access to codes they provide in the Library (to a point), but if you have taken the time to learn the commands you should be able to view them in the device/software.
|
Home Automation: www.imaxis.ch |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
