Post 1 made on Friday February 2, 2007 at 07:02 |
stindig Long Time Member |
Joined: Posts: | April 2006 43 |
|
|
I'm sure I'm being stupid here but I can't find a way of importing device codes from a different NevoSL configuration file. I have downloaded a complete NevoSL configuration file from the 'Files' section of this site. It seems to contain the X10 codes I require but I can't work out how to transfer just the device command codes into my config.
The original X10 command set from the 'Add Device' Wizard does not contain the code I require.
stindig
|
|
Post 2 made on Friday February 2, 2007 at 10:03 |
Ponkie Lurking Member |
Joined: Posts: | February 2007 9 |
|
|
If I understand it well, I think I have the solution. Copy the page from the config (project) file you downloaded and paste it in the desired project file. You will see that the device is included in your device list. Then you can work with it. But indeed there should be an easier way.
|
|
|
Post 3 made on Monday February 5, 2007 at 09:30 |
Gargoyle73 Long Time Member |
Joined: Posts: | December 2006 14 |
|
|
Ponkie, you pretty much nailed that one on the head. That's pretty mucht he easiest way to do it.
|
|
OP | Post 4 made on Thursday February 8, 2007 at 11:05 |
stindig Long Time Member |
Joined: Posts: | April 2006 43 |
|
|
Thanks Ponkie. That worked and I can now use X10 control for the first time. Wahey.
What a clunky method though. I had to remove all but one of the other configs devices before pasting into my config. Then, having gained access to the correct device code and having used it on one of my own pages, I had to remove the alien page that had previously been pasted in.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.