| Post 1 made on Saturday January 7, 2012 at 12:14 |
PRThomasUK Lurking Member |
Joined:
Posts: | January 2012
2 |
|
|
Does anyone have or know if discrete codes for powering the Sumvision Cyclone MKV on and off exist??? I'm using an old Pronto RU940 so RC5 codes would be good :)
I've got discrete codes for everything else, would be nice to add this to the collection too!
|
|
| Post 2 made on Saturday January 7, 2012 at 12:50 |
MacrossZero Active Member |
Joined:
Posts: | March 2009
594 |
|
|
Have you contacted the manufacturer to see if the code's actually exist? They might be able to send them to you via email.
|
Do or Do not, There is no Try. |
|
| OP | Post 3 made on Sunday January 8, 2012 at 17:08 |
PRThomasUK Lurking Member |
Joined:
Posts: | January 2012
2 |
|
|
Just in case anyone else is looking... It appears the Cyclone MKV does not support Discrete Power ON/OFF!
I used IRTool, DecodeIR.DLL, ProntoUtil & IRPanels to create a panel with all 256 available commands.... All the functions of the original remote worked, so I know the panel was good, discrete power just doesn't exist :(
A big thanks to the developers of IRTool, DecodeIR.DLL, ProntoUtil & IRPanels... The combination saved me a great deal of time!!!
|
|
| Post 4 made on Saturday February 18, 2012 at 03:32 |
sirclive Lurking Member |
Joined:
Posts: | February 2012
2 |
|
|
Is there any chance you might be able to post the Pronto config you have for the Sumvision? I've managed to lose the original remote before recording it on my Pronto
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
