| Post 1 made on Monday May 20, 2002 at 16:28 |
lazylazyjoe Founding Member |
|
|
I know xantech has the gatekeeper for current sensing, but you have to buy the master module and then buy their current sensor.
Does anybody make a simple curent sensor with an ir learning capability. Something like: You teach it 2 random ir codes (one you will send for source on, one for source off) and a third code which is the actual toggle power code for the device. It then will only send the toggle power command based on which ir code you sent it and the power state.
Does something like this exist, or am i dreaming.
-joe
|
|
| Post 2 made on Monday May 20, 2002 at 19:58 |
Matt Founding Member |
Joined:
Posts: | August 2001
1,802 |
|
|
You could go with an ADI Ocelot and an add-on module that will do what you want, and TONS of other x-10 control, contact closure, etc. Check out www.appdig.com and look under Addicon.
|
|
| Post 3 made on Tuesday May 21, 2002 at 20:41 |
jwalkup Founding Member |
Joined:
Posts: | December 2001
320 |
|
|
Joe,
To get more problem solving ideas, try posting the problem (type of equipment/remote & what you want it to do).
John
|
|
| Post 4 made on Wednesday May 22, 2002 at 03:50 |
Sheik_Yerbouhti Founding Member |
Joined:
Posts: | April 2002
401 |
|
|
Excellent Advice from jwalkup,
|
You are transparent! I see many things;
I see plans within plans. The Spice must flow! |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
