Post 1 made on Monday January 23, 2017 at 19:37 |
brucewayne Advanced Member |
Joined: Posts: | March 2006 895 |
|
|
I have a client with a crestron system. They are remodeling a room that has 5 TV's I want to control with RTI. There is a crestron system for multi room. I really only need RTI to send 4 commands to the crestron system. Should this be a problem. We are going to replace to crestron in a year or 2 but can't now
|
brucewayne |
|
Post 2 made on Monday January 23, 2017 at 20:08 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
As long as it has the right gateway, you should be good to go.
|
"Quality isn't expensive, it's Priceless!" |
|
Post 3 made on Wednesday January 25, 2017 at 16:40 |
thecynic315 Senior Member |
Joined: Posts: | August 2008 1,001 |
|
|
You'll need a Crestron CNRFGW, no longer made.
Access to the Crestron code to program the 4 commands.
|
|
Post 4 made on Saturday January 28, 2017 at 18:52 |
Tony Golden Founding Member |
Joined: Posts: | August 2001 654 |
|
|
It would be a *LOT* simpler, and probably cheaper, to just add Crestron remotes, especially the HR-150.
|
|
Post 5 made on Sunday January 29, 2017 at 02:51 |
mrfreeze Long Time Member |
Joined: Posts: | November 2004 167 |
|
|
Do you have the source code for the Crestron system that is installed ? That will be required as mentioned above.
I do have to ask why remove the Crestron system?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.