Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
weird IR issue with bell fibe remotes and mx890 mrf260 combos
This thread has 3 replies. Displaying all posts.
Post 1 made on Wednesday April 17, 2024 at 09:53
miggy_wiggy
Junior Member
Joined:
Posts:
April 2024
1
Hi everyone I'll try and be as detailed as I can

I'm currently having an issue with a Bell VIP5662w box, the box works with a Bluetooth remote however I've reset the box and removed the Bluetooth remote from the equation, and the box only works through IR now.

The strange issue that I'm having is;

the none of IR blasters off of the the mrf260 are able to control the the box, I've moved the position over the entire front face of the box, I have tried different blasters, I've used both variable and fixed outputs of the MRF, I've changed the blaster strength on the MRF through the whole range available.

All other devices inside of this cabinet are working correctly.

the only way I am able to get it to work currently is using the mrx 890 with the cabinet doors open AND I have to point the remote AWAY from the box i.e. at the wall on the opposite side of the room, pointing the remote directly at the box results in nothing working. I haven't come across this problem before usually with bell remotes I've just had to mess around with placement but it's usually worked out otherwise am I missing something?
Post 2 made on Wednesday April 17, 2024 at 10:39
buzz
Super Member
Joined:
Posts:
May 2003
4,434
Full disclosure: I have no experience with this unit.

Could this be a signal strength issue? If so, attenuate the signal received by the VIP5662w with some tape over it's IR receiver. Experiment with partial occlusion, pinholes, or tape color if the tape is not completely opaque.

Another area to explore is the number of repeats baked into each command.
Post 3 made on Wednesday April 17, 2024 at 15:15
Brad Humphrey
Super Member
Joined:
Posts:
February 2004
2,647
Which code set are you using?
For some cable boxes, there are multi code sets depending on if you are using IR direct from the remote or using IR from the RF base station.
This could be your problem.
Post 4 made on Tuesday September 24, 2024 at 06:05
ulnaoperating
Junior Member
Joined:
Posts:
March 2024
3
On April 17, 2024 at 09:53, miggy_wiggy said...
Hi everyone I'll try and be as detailed as I can

I'm currently having an issue with a Bell VIP5662w box, the box works with a Bluetooth remote however I've reset the box and removed the Bluetooth remote from the equation, and the box only works through IR now. gorilla tag

The strange issue that I'm having is;

the none of IR blasters off of the the mrf260 are able to control the the box, I've moved the position over the entire front face of the box, I have tried different blasters, I've used both variable and fixed outputs of the MRF, I've changed the blaster strength on the MRF through the whole range available.

All other devices inside of this cabinet are working correctly.

the only way I am able to get it to work currently is using the mrx 890 with the cabinet doors open AND I have to point the remote AWAY from the box i.e. at the wall on the opposite side of the room, pointing the remote directly at the box results in nothing working. I haven't come across this problem before usually with bell remotes I've just had to mess around with placement but it's usually worked out otherwise am I missing something?

Could you please clarify which codes you are referring to? The RF base stations and remote controls used by various cable boxes employ different infrared (IR) codes.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse