my rx-250 does not have an Ethernet cable port. Is there another model to hook to the mrf-350?
or are you talking about cutting the ends off my ethernet cable? Only problem with that is that it currently supplies an internet connection.
I do have an hdmi extender that has an IR extending port. It coverts hdmi to cat 6 cable then back to hdmi for long runs. Built in is an ir extender via 3.5 input.
But it's only ONE port for a 3.5 cable.
I am trying to control an Integra 80.3 avr and a media streamer. The 80.3 has and ir in on the back and an ir out as well. Media streamer will need an emitter attached to it as no direct ir in.
There is an MRF-350 by the 80.3 and an MRF-250 by the area I am tryin to control these devices from (kitchen). It's 70 feet away and not line of sight
Any way to get some sort of Y adapter for the MRF-250 ports and take up 2 ports, run that through a single output end that plugs into the IR extender in the hdmi extender., out of that into the 80.3 then out of that into the streamer? Only thing may be the y adapter needs an auto switching device in it.
Any other ideas that are not too expensive?
Last edited by Diamond Dog on July 1, 2013 03:08.