Your Universal Remote Control Center
One For All & Radio Shack Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 35 made on Saturday October 3, 2009 at 16:15
Select Member
August 2009
I'll provide a set of function codes here, but here is how you could do this yourself. There is a wealth of information at [Link:].  There are software tools which are intended to allow you to customize the behavior of the remote by connecting it to a PC via the JP1 connector inside the battery compartment.  One of the tools, called RemoteMaster, will tell you which EFC to use, assuming your DVD or a similar model is in the Files Section.  So you would go to the Software forum, download and install RM, along with files which describe the internal workings of the remote and images of the remote.  (If you are using a cable, you can use the image of the remote to assign functions to a particular key by drag and drop.)  Then you would look in the File Section, Upgrades, DVD, and find instances of Panasonic DVDs.  In this case there is a master file which covers pretty much all Panasonic DVD players, but I have used one which is specific to 5 disc changers.  After downloading the upgrade and opening it in RM, the EFCs are shown.  If you want to try this, please read the sticky in the Beginners Forum entitled Read this First.

Panasonic protocol, device 176
0 249
1 117
2 121
3 119
4 123
5 116
6 120
7 118
8 122
9 245
power 024
AV enhancer 200
FL select 158
Open close 185
Multi remaster 081
Depth enhancer 237
repeat 060
play speed+ 203
play speed - 196
positiom memory 166
cancel 195
ten 2 digit 065
quick replay 067
skip backw 041
skip forw 039
slow backw 180
slow forw 184
stop 181
pause 182
play 055
direct navi 003
play list 189
enter 191
display 127
up 192
down 190
left 194
right 061
return 193
subtitle 129
audio 155
angle page 125
setup 124
play mode 064
slepp 083
zoom 177

Hosting Services by ipHouse