Your Universal Remote Control Center
HDTV Reception Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 785 made on Friday October 13, 2006 at 14:03
Long Time Member
March 2006
On October 13, 2006 at 13:24, douglee said...
Woo Woo it's here!!

Last night my receiver scanned channel 64 into it's database
so it now appears when I surf channels. About an hour
ago, it wasn't there, but as of 15 minutes ago, its live
with programming. As above, I have problems getting audio
track 1 on my RCA. Audio 2 is there and is 680 news, the
same thing as the sap on analog channel 47.

Further to my last message, I have just scanned channel 64 into my Samsung SIR-TS360.
The audio works normally on both channels. Both stations show up as virtual channel 1-1.
when I scroll throught the channels, there are two 1-1 entries. I didn't notice on the RCA as it has a menu item to turn off PSIP decoding. This causes the virtual channel table, schedule and time of day to be ignored and all channels appear on their actual RF channel. I normally run it this way as it locks up better.

P.S. with PSIP turned on, the RCA associates channel 17 and 43 so when I tune channel 17 analog, I get a program schedule. Unfortunalely, if it can't receive a good enough signal on 43, it won't display 17 at all. With PSIP turned off, I also receive another sub channel on WXXI 16. It is audio only from WXXI AM 1370 radio and does not show up with PSIP turned on.

Hosting Services by ipHouse