| Post 2 made on Wednesday November 13, 2013 at 21:42 |
RemoteQuest Long Time Member |
Joined:
Posts: | October 2008
245 |
|
|
You may want to see if the sub has a switch for power sensing. If it does it will turn on by itself whenever enough voltage is present at the speaker terminals. If this model has it, turn that switch off and you should have control over it via the Nevo and NC-50. Of course this assumes that you have the right codes in the Nevo for it and have setup the NC-50 correctly.
DD
| |
|
|
