The following page was printed from RemoteCentral.com:
Post 4 made on Wednesday April 13, 2011 at 11:39 |
MattyMcfly Long Time Member |
|
|
Material Signal Loss Range Reduction Interior Wall (Sheetrock) 4.5dB 10‐12% Standard Slab Door (Hollow core) 5.5dB 10‐15% Standard Slab Door (Solid core) 8dB 15‐20% Brick (Decorative 3.5") 12dB 45% Open Field @ 30ft 4dB 5% Interior Window (Glass) 1dB 3% Masonry Structural Block (6") 14dB 45‐55%
This is a general rule of thumb of signal loss you can expect through certain materials
Might also be worth checking that 1 Q50 is showing as a Primary & 1 as a secondary controller & that you optimise the primary before you optimise the secondary. also if you have made any changes in the config you must re-upload the config to both remotes as each time you change something the config is given a unique ID number
|
|
|
|