On May 26, 2010 at 18:19, artlewis said...
Hi, I am new on the forum.
None of the codes for DVD, satellite, or VCR work, so I must be missing something. Do I have to be in Command Mode AV2 to program the remote? If so, how do I get the receiver itself to respond to power-on button in AV1? Power On is factory programmed to the default AV2.
I just tried to program a RM-LG112 with the learning function and now see that according to my manual, the learning function only all applies to the RM-PG412. Can you confirm this?
You didn't say which receiver you have so I can't do any checking.
The receiver and the remote must be in the same command mode, either AV1 or AV2, for the remote to work. If you can change both, that's good; if you can only change one then change it to match the other device's code.
This statement appears at the top of this thread, so if you have any more questions, start a new thread in the forum.
THIS THREAD IS INTENDED AS A REFERENCE SOURCE FOR OWNERS OF SONY RECEIVERS. PLEASE DO NOT POST QUESTIONS HERE.
