|
|
|
The following page was printed from RemoteCentral.com:
Topic: | New RS remotes This thread has 163 replies. Displaying posts 106 through 120. |
|
Post 106 made on Monday November 11, 2002 at 16:05 |
jamesgammel Founding Member |
Joined: Posts: | March 2002 1,152 |
|
|
You're not required to call it a vcr code. You could name it a sat code; however, you'd have to go back to the buttons sheet and see if the buttons are still assigned the way you want, and you may not be able to assign them exactly as you want. You'll have to decide which you can live with more. Jim
|
|
Post 107 made on Monday November 11, 2002 at 18:58 |
JackRelahan Long Time Member |
Joined: Posts: | November 2002 20 |
|
|
Found a way to use the PHANTOM KEY (ph 1-9) It seems, for what ever reason, that (ph1) does not work on my setup. However, this programing works for me: Using KEY MOVES: TV ph2 TV TV 0000 $F4 109(aka 365 or 621) VCR ph3 VCR VCR 0032 " " " " " " DVD ph4 DVD DVD 0533 " " " " " "
Using MACROS: Power TV;ph2;VCR;ph3;DVD;ph4 (Turns these devices off) (All Sony's)
Hope this will help others with the PHANTOM KEY. Thanks Jack Relahan
|
|
Post 108 made on Monday November 11, 2002 at 19:06 |
ext interrupt Long Time Member |
Joined: Posts: | November 2002 33 |
|
|
On 11/11/02 16:00.23, JackRelahan said...
Would I assign the Phantom key in IR.EXE using "Key Moves"??? Then use Phantom key in a macro??? Yes - You need a keymove for each device you want the macro to work for. Set the keymoves like: 1. TV , ph1, TV dev, devType, setupCode, EFC 109 2. DVD, ph1, DVDdev, devType, setupCode, EFC 109 If you have other Sony devices that have discret off codes, you'll also need to set those keymoves up. Then set your macro up as you described. Good Luck
|
|
Post 109 made on Monday November 11, 2002 at 19:33 |
The Robman Loyal Member |
Joined: Posts: | August 2001 6,218 |
|
|
On 11/11/02 15:58.47, schivins said...
The only thing I don't like now is the TiVo is an added device VCR 0636. I loaded the protocol into KM and re-generated a code for the 2116.
Now the problem is on the remotes LCD it says VCR and the 0636 which I understand since it displays the device of VCR. Can I get this to say SAT instead somehow? Absolutely, just go back to KM and change the device mode to SAT, then re-load the code. You'll lose the FREEZE button, but gain the INFO button. However, you can fix up whatever buttons are missing from the code with keymoves. Rob
|
|
|
OP | Post 110 made on Wednesday November 13, 2002 at 09:38 |
revwillie Founding Member |
Joined: Posts: | January 2002 75 |
|
|
On 10/26/02 04:44.28, edmund said...
Producer 8's are going for $30-$40 on EBay. You can also look for 1935's. I don't think the 1925 will fit. Just curious: is the 1925 puck a different size or does it mount differently?
|
|
OP | Post 111 made on Wednesday November 13, 2002 at 10:42 |
revwillie Founding Member |
Joined: Posts: | January 2002 75 |
|
|
On 11/11/02 19:33.38, The Robman said...
You'll lose the FREEZE button, but gain the INFO button. However, you can fix up whatever buttons are missing from the code with keymoves. what's the deal with the INFO key? somebody at UEIC must have overlooked something. I'm probably going to change the replaytv protocol from a VCR to a CABLE so I don't have to use a keymove for INFO.
|
|
Post 112 made on Wednesday November 13, 2002 at 21:59 |
schivins Lurking Member |
Joined: Posts: | November 2002 7 |
|
|
On 11/11/02 19:33.38, The Robman said...
Absolutely, just go back to KM and change the device mode to SAT, then re-load the code. You'll lose the FREEZE button, but gain the INFO button. However, you can fix up whatever buttons are missing from the code with keymoves.
Rob Rob, I went into KM and did this and the device listed in IR says SAT: 0636 but the remote still says VCR, weird 8o) Ideas? Yes I uploaded the new one to the remote :) -Jace
|
|
Post 113 made on Wednesday November 13, 2002 at 23:02 |
jamesgammel Founding Member |
Joined: Posts: | March 2002 1,152 |
|
|
Jace, Just out of curiosity, did you delete the vcr one first (The vcr_0636 upgrade you loaded previously)? Also, did you remember to change the device button name to "sat", then enter 0636 on the general tab. In your case, the sat button will be called "sat" from the drop down menue, and the device code box should read 0636. Jim
|
|
Post 114 made on Thursday November 14, 2002 at 00:07 |
edmund Elite Member |
Joined: Posts: | April 2002 13,839 |
|
|
Jace, do you have a stand alone tivo? Or a Directivo?
|
|
Post 115 made on Thursday November 14, 2002 at 02:30 |
edmund Elite Member |
Joined: Posts: | April 2002 13,839 |
|
|
On 11/13/02 09:38.48, revwillie said...
Just curious: is the 1925 puck a different size or does it mount differently? I couldn't say, never took apart a 1925. Its a very different shape remote.
|
|
OP | Post 116 made on Thursday November 14, 2002 at 10:49 |
revwillie Founding Member |
Joined: Posts: | January 2002 75 |
|
|
On 11/14/02 02:30.39, edmund said...
I couldn't say, never took apart a 1925. Its a very different shape remote. Theres a 1925 on ebay right now. I might give it a shot.
|
|
Post 117 made on Thursday November 14, 2002 at 13:33 |
schivins Lurking Member |
Joined: Posts: | November 2002 7 |
|
|
On 11/13/02 23:02.39, jamesgammel said...
Jace, Just out of curiosity, did you delete the vcr one first (The vcr_0636 upgrade you loaded previously)? Also, did you remember to change the device button name to "sat", then enter 0636 on the general tab. In your case, the sat button will be called "sat" from the drop down menue, and the device code box should read 0636. Jim Yes I deleted the device first in IR then added the new one. I changed VCR to SAT device type on the setup tab in KM and left the 0636 intact. I *just* changed the device should I have done anything else? Edmond, I have a normal Sony TiVo.
|
|
Post 118 made on Thursday November 14, 2002 at 18:52 |
ext interrupt Long Time Member |
Joined: Posts: | November 2002 33 |
|
|
On 11/14/02 13:33.37, schivins said...
I *just* changed the device should I have done anything else?
I think Jim was saying that besides deleting the old upgrade, you should change the device type. This is on the main page of IR where it lists all the device setup codes in your remote. #4 SAT under "device buttons" - you need to click on the device type and change it from VCR to SAT on the scroll menu. Then upload to the remote. Scott
|
|
Post 119 made on Thursday November 14, 2002 at 20:09 |
jamesgammel Founding Member |
Joined: Posts: | March 2002 1,152 |
|
|
Three places should say Sat_0636.1.The KM Sat_0636 device upgrade. 2. IR General Tab, Sat Button=Sat(from the scroll down menue, and 0636 in the device code box, and 3. Devices Tab, Sat_0636 the upgrade. If all you did in KM was change the vcr to Sat as device type, you might get a little disappointed; the key maps for the 2 device types are different. So, some of your functions may be missing. The buttons not allowed in Sat that were for vcr, and the keys unavailable for vcr that are now available for Sat. So, after changing the device type, you should go to the buttons tab and see if you need to do some function shifts on the buttons. If you had any keymoves to or from the vcr_0636 to say, tv for instance, you'll need to redo those keymoves as well, since vcr_0636 doesn't exist anymore. Jim
|
|
Post 120 made on Saturday November 16, 2002 at 21:31 |
schivins Lurking Member |
Joined: Posts: | November 2002 7 |
|
|
On 11/14/02 20:09.32, jamesgammel said...
Three places should say Sat_0636.1.The KM Sat_0636 device upgrade. 2. IR General Tab, Sat Button=Sat(from the scroll down menue, and 0636 in the device code box, and 3. It worked! It must have been the general tab sat=sat that I forgot to do :) Thanks for all your help guys! They moving keys etc.. was easy..Man I also want to thank the writers of IR and KM, great stuff once you learn it...
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|