Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Volume Pop-up, URC Total Control 2.0, Remote TRC-1080
This thread has 1 response. Displaying all posts.
Post 1 made on Tuesday March 31, 2020 at 08:44
blockfit
Long Time Member
Joined:
Posts:
April 2019
19
Hi,

We are using URC Total Control 2.0 with a URC Remote TRC-1080 and MRX-15 in our Home Theater and were trying to enable Volume Pop-up. The Receiver we are using is capable of sending the message. However we don't know how to configure in the accelerator.

Hope someone here can help.
Post 2 made on Monday June 15, 2020 at 05:50
hagis67346
Junior Member
Joined:
Posts:
June 2020
1
On March 31, 2020 at 08:44, blockfit said...
Hi,

We are using URC Total Control 2.0 with a URC Remote TRC-1080 and MRX-15 in our Home Theater and were trying to enable Volume Pop-up. The Receiver we are using is capable of sending the message. However we don't know how to configure in the accelerator.

Hope someone here can help.

Hi buddy, trying similar stuff, did you get any guide till date?

Regards,
Kevin J. Hodge

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse