Post 1 made on Thursday July 30, 2009 at 13:45 |
Hello Can some one help me to provide the codes or more specifically, I will need the on/off hex codes. Best wishes Sorem.
|
|
OP | Post 2 made on Monday August 3, 2009 at 17:46 |
Any help anyone? Thanx Sorem.
|
|
OP | Post 3 made on Friday September 4, 2009 at 17:23 |
Any help please from anyone?
|
|
OP | Post 4 made on Wednesday October 14, 2009 at 14:01 |
Still waiting anyone....please. Would really appreciate any comments.
Cheers Sorem.
|
|
Post 5 made on Wednesday October 14, 2009 at 17:31 |
makitamark Advanced Member |
Joined: Posts: | April 2004 984 |
|
|
i have never used RS232 and so the information i have has not been verified.
All communications are performed with hexadecimal values and the checksum is the sum of all values except for the header. If a value is greater than two digits, such as in 11+FF+01+01=112, the foremost digit is discarded. Example) Power On & ID=0 Header Command ID Data Length Data 1 Checksu 0xAA 0x11 1 Power m → Header Command 0xFF Data Length Data 1 12 0xAA 0x11 1 1 - If you want to control all devices connected via serial cables at the same time regardless of their IDs, set the IDs to "0xFE" before sending the command. In this case, each set or device will execute the command but will not respond with an ACK message. Table 2-1 RS232 Communications Specifications Bit Rate 9600 bps Data Bits 8 bits Parity None Stop Bits 1 bit Flow Control None No Command Type Command Value Range 1 Status Control 0x00 - 2 Time Control 0x01 - 3 On Time Control 0x02 - 4 Off Time Control 0x03 - 5 Video Control 0x04 - 6 Audio Control 0x05 - 7 RGB Control 0x06 - 8 PIP Status Control 0x07 - 9 Maintenance Control 0x08 - 10 Serial Number Control 0x0B - 11 Display Status Control 0x0D - 12 Software Version Control 0x0E - 13 Model Number Control 0x10 - 14 Power Control 0x11 0 ~ 1 15 Volume Control 0x12 0 ~ 100 16 Mute Control 0x13 0 ~ 1 17 Input Source Control 0x14 - 18 Image Size Control 0x15 - 19 Direct Channel Control 0x16 - 20 Contrast Control 0x24 0 ~ 100 21 Brightness Control 0x25 0 ~ 100 22 Sharpness Control 0x26 0 ~ 100 23 Color Control 0x27 0 ~ 100 24 Tint Control 0x28 0 ~ 100 25 Red Gain Control 0x29 0 ~ 100 26 Green Gain Control 0x2A 0 ~ 100 27 Blue Gain Control 0x2B 0 ~ 100 28 Treble Control 0x2C 0 ~ 100 29 Bass Control 0x2D 0 ~ 100 30 Balance Control 0x2E 0 ~ 100 there is more but i guess if this bit works then i can post the rest. let me know if it is of help.
|
|
OP | Post 6 made on Friday October 16, 2009 at 16:14 |
Thanx very much. I will report back my findings. Cheers Sorem.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.