Your Universal Remote Control Center
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Controlling Russound CAA66 via RS-232 URC MX-5000/KP-4000
This thread has no replies.
Post 1 made on Friday October 25, 2013 at 17:38
Lurking Member
January 2013
Installing a Russound unit for a client and we are wanting to control it via RS-232 with the URC KP-4000 and MX-5000. So far we haven't been able to get any commands to work with it. The status light is lighting up on the MRX-1 when we send a command but nothing is working.

Unsure if I have the right commands although it's the right model number in the URC database.

Serial Properties are
Baud Rate: 19200
Data: 8
Parity: None
Stop: 1

This is the settings Russound sent me...

Taken from “Russound_Controllers_Protocol_v1_00_04.pdf”

The following settings must be made to the RS-232 serial COM port used to interface with the
• 19200 baud rate
• 1 Start bit
• 1 Stop bit
• No flow control
• No parity

Any ideas or directions to move forward?

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse