|
|
|
Lighting & Home Control Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
home control HP Pavillion / SCSI serial...
| |
|
Topic: | home control HP Pavillion / SCSI serial problem This thread has no replies. |
|
Post 1 made on Wednesday March 31, 1999 at 21:16 |
paul lahaise Historic Forum Post |
|
|
Ok, (thanks for opening up an x10 forum, by the way!)
I have the Home Control system, or whatever the system is that gives you the serial cable / box with software to control x10 with macros, etc.
I also just bought the HP Pavillion 4445 computer. It's a 366 Celeron, 128 megs ram.
When I installed the serial box, I was able to control the lights ok. Then, when I added an ISA Adaptec SCSI card, the HC software stopped working. It complains of not being able to see the connection (error 73, I think). Funny thing is, the SCSI card has an address in the 100's, the COMM 1 port in the 300's. The SCSI card has IRQ 10, the COMM 1 is IRQ 4. Nobody complains.
I also downloaded the latest software from X10.
Here's another wrinkle. I have the Madrigal IRIQ remote control, and 90% of the time, thru that COMM 1 port, the remote software is able to talk to the remote. Ideas?
Thanks, Paul
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|