Post 1 made on Wednesday September 1, 1999 at 16:14 |
I have heard that an Inductive Dimmer switch is what should be used to control a ceiling fan. They will however generate a hum on MOST ceiling fans.
My question is, what brand, type, model ceiling fan will work with an X-10 dimmer switch but not generate hum.
|
|
OP | Post 2 made on Wednesday September 1, 1999 at 16:30 |
Chris Couture Historic Forum Post |
|
|
The better the motor the less chance the hum will be noticeable. It’s the windings of the motor that cause the hum. It is kind of a “luck of the draw”, too of the same brands, same fan could be totally different. You may want to use a standard X-10 switch and use the pull chain to control the speed. This way you will have no noise problems.
Chris Couture
|
|
OP | Post 3 made on Wednesday September 1, 1999 at 16:55 |
Daniel Tonks Historic Forum Post |
|
|
For quiet ceiling fans, you'll probably want to consider a Hunter.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.