Post 1 made on Friday August 27, 1999 at 15:23 |
Brian Porter Historic Forum Post |
|
|
This is just to fill the rest of you in on what Bevan and I have discovered.
It looks like in the quick_x10.ccf file, Ivan Luk modified the Dim/bright commands(the ones on the code specific pages, NOT the generic page) to include the device number. He basically combined the device number with a lengthened dim command into a single hex command.
Now when you press any of those dim/bright buttons ALONE, the programmed device will turn on and then dim/brighten. For those of us with dumb devices(non-expensive ones) this allows the use of bright/dim as a discrete device on(no need to macro device code and ON button together) AND dim/bright since these "dumb" devices will turn full on when they see a bright/dim command. This eliminates the need for on buttons.
What we are looking for now is a way to combine the dim and off buttons without the ON device turning OFF THEN ON THEN dimming.
Seems as if you put a one time code and a repeat code into the pronto, the one time code is STILL executed even if you hold the button down from the beginning.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.