Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Rebooting T2X
This thread has 2 replies. Displaying all posts.
Post 1 made on January 2, 2015 at 14:55
R
RGKaufmann
Lurking Member
Joined:
Posts:
January 2015
2
What keystrokes reboot the T2X - Thanks
Post 2 made on January 2, 2015 at 15:25
G
MOD
Glackowitz
RC Moderator
Joined:
Posts:
RC XP:
May 2002
3,814
224⭐︎
To power the T2x on:
• Press and hold the “Backlight” button and the “OK” buttons simultaneously
until the remote turns on (approx. 1-2 seconds).
OR
• Place the T2x in the docking station - this will automatically power the unit on.
(Docking station does not need to be powered).
To power the T2x Off:
• Press and hold the “Backlight” button and the “OK” buttons simultaneously
until the remote turns off (approx. 5 seconds).
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far.
OP | Post 3 made on January 2, 2015 at 17:12
R
RGKaufmann
Lurking Member
Joined:
Posts:
January 2015
2
Thanks very much and Happy New Year. -Bob

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.