Post 1 made on Sunday January 29, 2012 at 20:49 |
djf_jeff Lurking Member |
Joined: Posts: | January 2012 2 |
|
|
Hi everyone,
I have a really strange problem with my RM VL-610 remote. Everything was working fine until this morning when I decided to do a factory reset and reprogram my equipment.
The learning process went well and every buttons work. But now, when I keep the vol+ button down for example, it sends the code once my I must press 4 four times to increase the volume by 4.
Before the reset, I would just have keep the button down and it would resend the signal multiple times.
This is the same thing with every button (ch+, ch-, up arrow, down arrow, etc). The original remote all work well when the buttons is keep pressed.
Thank you for your help!
|
|
OP | Post 2 made on Wednesday February 1, 2012 at 14:01 |
djf_jeff Lurking Member |
Joined: Posts: | January 2012 2 |
|
|
Just to let everyone know how I solved my "problem"... This was on my part... I didn't hold the button on the original remote long enough.
That will teach me to read the manual so fast!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.