Post 1 made on Sunday January 10, 2010 at 15:40 |
Hi,
I picked up this Sony remote to control one of our rooms. So far, I'm pretty satisfied but one thing has me confused. Here's what I'm trying to control: TV (RCA), FIOS box (Motorola) and a pre-amp (Outlaw 970).
The issue is the Outlaw - there are now component codes for it so I've used the learning function of the Sony in order to transfer various functions. After that I setup a series of commands through the system control functions to power on the amp, turn on the FIOS box and turn on the TV. Works fine - except when I user the same system control to power stuff off. Both the TV and FIOS box power off but the pre-amp stays on.
I've tried using the learning function to control power off but no luck. I do this by hitting the set function for several seconds, then hit the amp component and then hit the power button. Seems as though you can't 'learn' power - is that the case? The Outlaw uses discrete codes - not sure how this translates to the Sony.
Thanks! Bob
|
|
Post 2 made on Sunday January 17, 2010 at 21:18 |
bodhi78_rc Long Time Member |
Joined: Posts: | November 2009 30 |
|
|
I'm not familiar with Outlaw preamp. However, I had no problem with this remote learning power toggle from another device. Sounds like you've taught the Sony the Outlaw's discrete ON, not the toggle On/Off?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.