Post 1 made on Thursday June 24, 2004 at 05:20 |
RECEIVER: STR-DE597 - How To Use A Universal Remote
On the Receiver: (STR-DE597- the command mode must be changed on the receiver to AV1. The receiver and the remote are factory set to AV2.
If Receiver Is Changed to AV1, your universal remote presets Should Work Fine. If the receiver is left at AV2 (default), you will have to use the original STR-DE597 remote and learn everything from the STR-DE597 remote to another learning remote).
Here's How To Change The Receiver To AV1. And Then Use A Preset Code From A Universal Remote.
1. On The Receiver Press I/O to turn the power Off 2. Then, on the receiver hold down ENTER and press I/O this will switch Receiver to Av1, you can now use yor universal remote (my One For All URC6012 Would Not Work Until The Receiver Was Chaged To AV1.)
My One-For-All URC6012 Now Works Fine With The Provided Code (1058).
Thanks For The Help, This Was Driving Me Nuts...
Jim
|
|
Post 2 made on Thursday June 24, 2004 at 08:01 |
Ron Aronson Super Member |
Joined: Posts: | June 2002 3,967 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.