Post 1 made on Wednesday October 26, 2005 at 13:49 |
ecomparoto Lurking Member |
Joined: Posts: | October 2005 2 |
|
|
I have a Sony AV3100 remote and was told there are no codes for Dishnet sat. components 522 & 811 is this true, if not what are the codes to program these devices?
|
|
|
Post 2 made on Wednesday October 26, 2005 at 18:23 |
cb1 Select Member |
Joined: Posts: | September 2002 1,663 |
|
|
Echostar 3010, will giv eyou basic controls,but no chan up and down.
|
why have a nice system if you cant operate it, program the remote the right way the FIRST time! |
|
Post 3 made on Wednesday October 26, 2005 at 19:27 |
edmund Elite Member |
Joined: Posts: | April 2002 13,841 |
|
|
First, code 3010 is only for address/ID #1, so you will need to teach all the commands for one receiver set to different ID code.
Since you can't learn from 811 remote, it being RF only, set that to ID#1, learn from 522 remote set to a dfferent ID #.
|
|
Post 4 made on Monday January 30, 2006 at 08:29 |
DarrinH Lurking Member |
Joined: Posts: | January 2006 4 |
|
|
Can you explain this a bit more? I have an 811 and have had trouble getting my 3100 to run it. What do you mean by ID#1? I found that my 811 has a teaching tool where the receiver echos back the RF signal with an IR signal, but I have not had any luck with those IR signals working once programmed in. It ended up locking up my 3100 and I had to remove a battery to get it to come back on. Once I did I lost all my programming.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.