| Post 1 made on Tuesday February 11, 2003 at 20:08 |
eisenb Lurking Member |
Joined:
Posts: | February 2003
2 |
|
|
Hello,
I have two UltimateTV boxes stacked on top of each other and would like to have a remote control set up which drives each box individually.
I can keep one on and one off and this keeps me out of trouble most of the time. However, sometimes they are both on because I'm watching one and the other is recording. In this case, the remote instructions affect both boxes. Is there an easy way to create a situation where the remote drives one particular box?
I apologize if this is an easy question -- I'm not an expert at this kind of stuff.
Thanks in advance,
Bill
|
|
| Post 2 made on Tuesday February 11, 2003 at 20:28 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,841 |
|
|
If they're both W60's, short of replacing one with an RCA or a tivo, there's nothing you can do. RCA utv's have 2 remote addreses, but the Sony only one. Sony Dtivo's have three codes, one being the same as the W60's.
|
|
| OP | Post 3 made on Tuesday February 11, 2003 at 23:32 |
eisenb Lurking Member |
Joined:
Posts: | February 2003
2 |
|
|
That's bad news, but thanks for taking the time to provide good information!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
