Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
NO Idea
This thread has 4 replies. Displaying all posts.
Post 1 made on Wednesday January 12, 2005 at 18:37
Hgaulden
Lurking Member
Joined:
Posts:
January 2004
9
I have a RCA crk67g2 universal remote. I can't find any instruction on how to program it. It doesn't have a code search or program buttom. I've been seaarching and also unable to even locate a picture of the remote. The closet thin I found was RCA CRK67A1 but no programming instructions with that one either. Any help would be greatly appreciated
Post 2 made on Thursday January 13, 2005 at 12:49
Anthony
Ultimate Member
Joined:
Posts:
May 2001
28,867
try [Link: remotecentral.com]
...
Post 3 made on Thursday January 13, 2005 at 13:33
The Robman
Loyal Member
Joined:
Posts:
August 2001
6,218
If you search the RCA.COM web site for CRK67A1 you will find several PDM manuals for devices that come with this remote. These manuals include the programming instructions.

The following instructions come from this manual.

Follow these steps to program your universal remote:
1. Turn on the component.
2. Look up the brand and code number(s) for the type of component you are programming in the code lists on the next pages or on the code sheet packed with your remote.
3. Press and hold the component button on the remote.
4. While holding the component button, enter the three-digit code from the code list.
5. Release the component button, then press one of the commonly used buttons for that component to see if the component responds to the remote commands.
6. Repeat steps 3 through 5 using the next code listed for your brand until the component responds to the remote commands.

Note: There may be some functions on the remote that will not operate on another brand of component. Try several buttons to see if it is programmed correctly.

Programming the AUX Button
The AUX button can be programmed like an existing component button for a second TV, third
VCR, second satellite receiver, or additional audio components.
Follow these steps to program the AUX button:
1. Turn on the component you want to program.
2. Look up the brand and corresponding code number(s) in one of the code lists on the previous pages.
3. Press and hold the AUX button on the remote. Then, press the other component button AM/FM, TAPE, CD, DSS/CABLE, etc.
4. Release the component button, but not the AUX button.
5. Enter the three-digit code from the code list.
6. Release the AUX button, then press the POWER or CHAN up or down to see if the component responds to the remote commands. If it doesnŐt, press AUX, then POWER again.
7. Repeat steps 3 through 6 using the next code listed for the brand of your component until it responds to the remote commands.
Rob.
[Link: hifi-remote.com]
Post 4 made on Thursday January 13, 2005 at 13:36
The Robman
Loyal Member
Joined:
Posts:
August 2001
6,218
Btw, could you change the subject line of this thread from the not very useful "no idea" to "Need programming instructions for RCA CRK67A1 or CRK67G2 remote".

That way, when someone does a search for one of these remotes in the future, they'll have a much better idea that this is a thread to look at.
Rob.
[Link: hifi-remote.com]
Post 5 made on Thursday June 17, 2021 at 16:20
Big Dick
Junior Member
Joined:
Posts:
June 2021
2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse