Your Universal Remote Control Center
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Any way to reset Marantz RC2000 MKII?
This thread has 5 replies. Displaying all posts.
Post 1 made on Monday August 30, 1999 at 00:13
Michael Cucka
Historic Forum Post
I was adding some LD codes to my RC2000/2 tonite when during learn, the low batt indicator came on. I changed the batteries and went back to learning, only to find my Marantz acting weird.

If I go back into LEARN and then press any button assigned to the LCD, the NAME mode button comes up (so that both LEARN and NAME are showing at the same time) and the remote won't learn. The function buttons on the main body will still learn without this thing with NAME happening.

Thinking I simply needed to reset the remote, I've come to the realization that I can't figure out how. Anybody know how to do this or what the basic problem with learning that has happened is due to?

Thanks for any help -
OP | Post 2 made on Tuesday September 7, 1999 at 20:27
f corriveau
Historic Forum Post
michael ,the remote is supposed to do that anytime you press one of the lcd buttons to learn a code it will flash name/ will not let you learn any of the hardbutton codes again until you leave the name/learn screen and loop back thru to regular learn again.i always learn all my names on the lcd first then go back and learn the codes in the lcd after.i you have any questions e-mail me.I've done many rc-2000s and know all the tricks
OP | Post 3 made on Tuesday September 7, 1999 at 20:31
f corriveau
Historic Forum Post
by the way press clear and hold, then press on and the off button then let go "all clear will display"
Post 4 made on Sunday February 27, 2011 at 17:53
Lurking Member
February 2011
F corriveau are you still on this board? I am having the same problem. What do you mean by 'cycle back' to regular learn mode - how do I do that pleas?
Post 5 made on Monday February 28, 2011 at 11:47
RC Moderator
August 2001
On February 27, 2011 at 17:53, DEvtodi said...
F corriveau are you still on this board? I am having the same problem. What do you mean by 'cycle back' to regular learn mode - how do I do that pleas?

I think it's a pretty fair bet to say that a member, with no profile to check, hasn't been around for quite some time.

Manuals for the RC2000 MKII (quick and full) can be found here and here.
Post 6 made on Tuesday May 19, 2020 at 14:46
Junior Member
May 2020
I have this remote and want to reset EVERYTHING I accidentally overwrought an Amp button (at least one) the is nothing to teach it from...

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse