Post 1 made on Wednesday August 26, 2020 at 04:27 |
Phillyb Junior Member |
Joined: Posts: | August 2020 9 |
|
|
I have a Philips Pronto 7500 and a xbox 360
I'm trying to cycle through the guide quickly.
If I press the arrow button once they all work however, if I hold down any of the arrow buttons it should cycle through the guide quickly.
I have tried the following in the Pronto NG software.
Setting the duration to the following times: Default, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45.
Most of them work however, some of them make the guide jump 2 slots if they are pressed once. None of them work with a long press.
Hope the above makes sense and someone can help.
|
|
Post 2 made on Wednesday August 26, 2020 at 11:00 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 13,058 |
|
|
When you say 'arrow button', please be aware that the 7500 has a 4 way cursor on it and I especially confused that with simple onscreen arrow buttons that you created.
Why is this important? Because the 4 way cursor can be turned off via a firmware such that it will only control remote page/device navigation.
Please post the IR code data and the source of the data (how you got it) for the codes that don't work.
I suspect these are toggle codes (see the Classic Pronto faq if you want to know more).
Thanks, Lyndel
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.