Post 1 made on Sunday January 14, 2018 at 11:32 |
nyokie Long Time Member |
Joined: Posts: | December 2003 20 |
|
|
Just got the new samsung x1 box with xr11 rf remote and of course i cant learn rf codes. I there a solution? I hate to give up my pronto, best remote ever made. Have bought a couple backup 7000s from ebay in case i broke one i love them so much. No one has built a fully customizable remote like it since that i know of. Help please haha
|
|
Post 2 made on Tuesday January 16, 2018 at 13:38 |
JurgenW Long Time Member |
Joined: Posts: | November 2005 53 |
|
|
I don't know about it. But this is from page 50 from the 7500 manual: Selecting RF to Operate your Devices 1 Tap and hold the ProntoPro NG icon in the upper left corner of the touch screen for 3 seconds. The Tools Menu appears. 2 Tap in the Tools Menu. The ‘RF IR Tool’ screen appears. 3Tap . The Device Overview appears. 4 Tap the Device for which you want to select RF. The ‘Select IR or RF’ screen appears. By default IR is selected in the Sending Signals list. The Define RF button is disabled. 5 Choose RF in the Sending Signals list. The Define RF button is enabled. 6Tap . The ‘RF Settings’ screen appears. 7 Select the RF Channel in the RF Channel list you use for the RF Extender. The RF Channel on the RF Extender has to be the same as the RF Channel on ProntoPro NG. 8 Select the Extender ID in the Extender ID list you use for the RF Extender. The Extender ID on the RF Extender has to be the same as the Extender ID on ProntoPro NG. Note 9 Tap You can use several RF Extenders with your ProntoPro NG. For each RF Extender you use for your devices, you need to set the RF Channel and the Extender ID. The RF Channel is identical for all RF Extenders. The Extender ID is unique for each RF Extender. in the ‘RF Settings’ screen. The RF settings are saved. 10 Tap inthe‘SelectIRorRF’screen. ProntoPro NG will send out RF signals for the selected device. Note Try to keep ProntoPro NG and the RF Extender away from metal objects, as this will have a negative impact on the range.
|
Best regards, Jürgen |
|
Post 3 made on Thursday January 18, 2018 at 13:50 |
DSTdrummer Lurking Member |
Joined: Posts: | December 2017 1 |
|
|
I don't know about Xfinity, but my DirecTV remote can be switched in to IR mode in the remote setup menu on the box. Then I can learn my IR codes to the TSU7000 at will.
Hope this helps.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.