Ok you experienced programmers , Help. I have media room with all kinds of components, Sony LCD, Denon Receiver, Pioneer CD Player, Sony Blue Ray, Pioneer SS Receiver All Work Great with the 7000. The problem is with the 7000 remote and the direct tv codes for this receiver. I have tried direct learning , hex codes , 10 % of the time it works , 90 percent it dose not work. I use the origional remote no problem. It seem the the philips just dose not like to learn or perform the codes. Is it a bad remote? Is it that at the time the philips was manufactured it did not meet the learning ability for the new direct tv codes. Cant learn newer Direct TV receivers range? I think its that but I wounder if anyone else found this in the field. Thanks for your input.
Ok After another of 4 hrs of More Trouble shooting I Replaced The Direct TV Receiver To A HR 21 Brand New Out Of The Box. Now The Factory Remote Works Fine With The MS-210 and Msu 480 (Niles). No Problem . Try and Use The Philips TSU 7000 Through The MS-210 Wont Work, Try and Use A RTI T-3 Wont Work. Heres What Kills Me I Call A Third Time To Niles To Get More Help And The Tech Says That They Have Specific Problems With The MS 210 The Newer Direct TV HD DVR Receivers . He Also Said Xantec and Rushsound . This Is More Than Just Moving The Flashers A little Left Of the Eye Or A Little Right, Or Putting Tape Over This. This Is Getting Crazy. From Now On It Looks Like If My Clients Wants HD TV Its Comcast Or Ant. Right Now It Works Great With The Factory Remote But These $900 Remotes Out Of Luck. Ill Try Reprogramming With The New Remote On The Philips But It Was Giving Me A Hard Time. ??????????????
Ok Everyone, Maby Iam a little slow or miss understood someone at tech support but HOPEFULLY SOMEONE ELSE CAN LEARN FROM MY MISTAKES. After more phone callS to Xantech, Niles, ,Jamo and a few more co. I was told that if the problem is only with direct tv codes and using any micro sensor and flasher system. The factory remote works great with the system but when you use any master remote like philips, RTI,etc. Its signel is too strong and wont work. After additonal trying of moving the falsher further away from remote eye and adjusting the msu flasher output from hi to low, using different hex codes, was alot of wasted time. THE CURE WAS COVER THE MICRO SENSOR HALF WAY WITH BLACK ELECTRICAL TAPE. By the way I am selling custom black electrical tape now for a low intro price of 19.99. Thanks Everyone and the Site for the HELP . From a 30 year experienced or now more experienced installer.
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.