Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Can not see clock on TSU3000
This thread has 5 replies. Displaying all posts.
Post 1 made on Saturday June 9, 2007 at 13:04
changer24
Long Time Member
Joined:
Posts:
June 2007
13
The installers of the HT we had put in did not install the clock on the TSU3000. The time does appear in the tool set up screen. So without calling them back out to the house to program the remote, is there a way to put the clock on every page of the remote? I do have some knowledge of programing this (usualy enough to mess it up), but not enough to fix the clock/time. Thanks
Post 2 made on Saturday June 9, 2007 at 20:19
Peter Dewildt
Loyal Member
Joined:
Posts:
July 2001
6,307
Go to the System Page, then select the Clock from the insert menu. You may need to move it if it appears over something else.
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400
Post 3 made on Saturday June 9, 2007 at 23:45
Dunks001
Lurking Member
Joined:
Posts:
June 2007
1
I have the same problem on my TSU7500. The insert option was greyed out. Any ideas?
Post 4 made on Sunday June 10, 2007 at 01:03
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
You can only add the Clock to the System Page under the System Device. In your System Device, there are 3 pages: System Page, Device Overview, Page Overview. Select the System Page and you should be able to insert a clock.
Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 5 made on Monday June 11, 2007 at 06:31
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,779
Also note that you cannot have stuff on other pages that would show overtop of where the clock would go, since the System page is basically a background.
Post 6 made on Wednesday June 13, 2007 at 14:39
Stoobie
Long Time Member
Joined:
Posts:
April 2004
362
On June 11, 2007 at 06:31, Daniel Tonks said...
Also note that you cannot have stuff on other pages that
would show overtop of where the clock would go, since
the System page is basically a background.

Like Daniel says if any of your other pages have something in the same position as the clock on the system page - it will cover the clock. This applies to anything such as buttons, panels, icons, design features and backgrounds (especially backgrounds -as panels that cover the whole screen are quite common and it can be quite confusing moving all the buttons etc only to find you still cannot see the clock, only to later realise you have a whole panel in the background))- so although the clock might be visble on some pages it might not be on others, so you may need to move things round a little

Stoobie

(edited for spelling)
RC9500, RC5400, RU940 & Pronto Neo, Windows Vista.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse