I'm in the process of formulating a spreadsheet that would allow anyone with a Pronto to generate a Xantech codeset using MakeHex and the file NEC.irp.

I've identified the patterns that the Xantech remote sends based on the button numbers on an RC68+. However, I'm missing 2 values that are not specified by buttons on the Xantech remote. I won't go into lengthy details here as I plan to cover the explanation in a public document I'll publish to this site. I also don't have an RC68+ and don't necessarily want to spend the $$$ to get hold of one. However, if someone out there will learn ONLY 2 codes for me, I can verify my assumptions and complete the data set.

Here's what I need. Someone with a Pronto, please select the codesets below and learn the IR signal for the Xantech RC68+ Button labelled '00' and post either the 900A or 0000 Pronto Hex Format results.

Codeset 0x02 (Top/Left Dial set to 0, Bottom/Right Dial set to 2)
Codeset 0x04 (Top/Left Dial set to 0, Bottom/Right Dial set to 4)

If you can please post these codes, I can get the data compiled and then publish the results. If you don't want to post, please email me with results @ email addy on my profile.

Thanks in advance,
Lyndel McGee

I'll have these for you shortly, just got home and have a few things to do first.

Jon

Here they are. Let me know if you need anything else.

Codeset 0x02
900A 006D 0000 0001 20DF 00FF

Codeset 0x04
900A 006D 0000 0001 807F 00FF

Jon

Many thanks Jon, this is just what I was looking for. I knew they were 20 and 80 but I did not know which one went where.

Lyndel