Your Universal Remote Control Center
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Hunter Douglas Shades with TSU 7500
This thread has 1 response. Displaying all posts.
Post 1 made on Sunday March 5, 2006 at 20:48
Long Time Member
February 2006

I have programmed my TSU 7500 to raise and lower three shades in my media room. When I used the Hunter Douglas remote, it was very directional and if you pointed at one shade, just that shade would operate. When I use the TSU 7500, no matter how much I try to point directly to the shade, all three begin to raise or lower. Is there any way to trim the width of the signal going out to the shades?
Post 2 made on Sunday March 5, 2006 at 21:17
Peter Dewildt
Loyal Member
July 2001
That is supposed to be one of the major strengths of the Pronto line - multiple IR emitters resulting in a wide beam, so you don't have to point so precisely.
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse